The Caterpillar 924K Wheel Loader: A Comprehensive Overview

Caterpillar 924K Wheel Loader Specifications

Engine

Engine Model Cat® C7.1 ACERT™

• Maximum Gross Power

ISO 14396 105 kW 141 hp

ISO 14396 (DIN) 105 kW 143 hp

• Rated Net Power @ 1,800 rpm

SAE J1349 at Minimum Fan Speed 101 kW 135 hp

SAE J1349 at Maximum Fan Speed 91 kW 122 hp

ISO 9249/EEC 80/1269 102 kW 137 hp

ISO 9249 (DIN) 102 kW 139 hp

• Maximum Gross Torque

ISO 14396 725 N·m 535 lbf-ft

• Maximum Net Torque

SAE J1349 700 N·m 516 lbf-ft

ISO 9249/EEC 80/1269 708 N·m 522 lbf-ft

Bore 105 mm 4 in

Stroke 135 mm 5 in

Displacement 7.0 L 428 cu in

Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.

Net power shown is the power available at the flywheel when the engine is equipped with alternator and air cleaner.

Dimensions

Ground Clearance 1.25ft in

Carry Height 1.5ft in

Centerline Of Front Axle To Hitch 4.91ft in

Digging Depth 3.8in

Dump Angle At Maximum Lift 50 degrees

Dump Clearance At Maximum Lift - 45 Degrees 9.4ft in

Height - Center Of Axle 2.21ft in

Height - Top Of Rops/Fops 10.9ft in

Length - Rear Axle To Bumper 6.5ft in

Overall Height - Bucket Raised 16.61ft in

Overall Length 24.4ft in

Rack Back Angle - Carry 45 degrees

Rack Back Angle - Maximum Lift 54 degrees

Reach At Maximum Lift And 45 Degrees Dump 3.3ft in

Wheel Base Length 9.81ft in

Bucket Pin Height - Maximum Lift 12.75ft in

Width - Over Tires 8.33ft in

Operational

Operating Weight 28360lb

Transmission

Forward - 1 8mph

Reverse - 1 8mph

Steering

Steering Angle - Each Direction 40 degrees

Steering Cylinder, Two, Bore 2.8in

Maximum Working Pressure 3500 psi

Steering Articulation 40degrees

Transmission

2 8mph

3 17mph

4 25mph

Standard Transmission Maximum Travel Speeds 25mph

Tires

Size 20.5 R25 Radial (L-3)

Buckets

Bucket Capacities 1.9 m3 - 5.0 m3 2.5 yd3 - 6.5 yd3

Operating Specifications

Static Tipping Load - Full Turn 16352lb

Articulation Angle 40degrees

Reach - Full Lift And 45 Degrees Dump 3.3ft in

Dump Clearance At Full Lift And 45 Degrees Dump Angle 9.4ft in

Service Refill Capacities

Cooling System 7.9gal

Fuel Tank 51.5gal

Crankcase 5.3gal

Hydraulic Tank 23.8gal

Hydraulic System - Including Tank 42.3gal

Transmission 2.2gal

Front 5.5gal

Rear 5.5gal

Loader Hydraulic System

Pump Flow - Implement Pump 40 gal/min

Maximum Working Pressure 3771 psi

Raise 5.5 s

Dump 1.5 s

Lower, Empty, Float Down 2.6 s

Total 9.6 s

Bore (1) 4.3in

Stroke (1) 28.7in

Bore (2) 5.1in

Stroke (2) 21.9in

Hydraulic Cycle Time 9.6 s

Cab

ROPS  SAE J1040 MAY94, ISO 3471-1994

FOPS  SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II

• Cab and Rollover Protective Structures (ROPS) are standard.

• The typical dynamic operator sound pressure level is 71 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab.

• The measurement was conducted at 70% of the maximum engine cooling fan speed, with the cab doors and cab windows closed. The cab was properly installed and maintained. The sound level may vary at different engine cooling fan speeds.

• A semi-cab option is available.

Common Uses

The Caterpillar 924K is a great choice for a wide range of applications, including construction, mining, forestry, and more. This machine can be used for loading and unloading materials, as well as for excavating, grading, and leveling. It is also capable of hauling heavy loads and performing other tasks that require a lot of power. Rest assured, the Caterpillar 924K will meet your needs.

Pricing

The CATERPILLAR 924K has an MSRP of $177,800. If you're looking to rent one of these machines, you can expect to pay around $700 for a day, $350 for a half day, and $2,150 for a week.

Maintenance and Fuel Costs

The estimated monthly maintenance costs for the CATERPILLAR 924K are around $2,000. This includes the cost of oil changes, filter replacements, and other necessary repairs. The estimated fuel cost per month is about $1,500, and the hourly fuel cost estimation is around $30.

Similar Models

If you take a look around our site, you can find various models that are similar to the Caterpillar 924K Wheel Loader. For example, you may want to consider the Caterpillar 930K, the Caterpillar 950K, or the Caterpillar 962K. All three of these models offer similar features and performance, but they may vary slightly in terms of size and power. You can have a look at these models Caterpillar 926M, Caterpillar 906M, Case 621F, and Caterpillar 930K.

Conclusion

The Caterpillar 924K is a powerful and reliable wheel loader that is perfect for a variety of applications. With its impressive operating weight and advanced hydraulic system, it can handle heavy loads with ease. In addition, its reasonable price and estimated monthly maintenance and fuel costs make it an attractive option for many businesses. If you're looking for a similar machine, you may want to consider the Caterpillar 930K, the Caterpillar 950K, or the Caterpillar 962K.