Introducing the Caterpillar 930M

The Cat 930M Specs: A Closer Look

Engine

Displacement - 427cu in

Bore - 4in

Stroke - 5in

Emissions

Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.

Engine Model

Cat C7.1 ACERT

Note (1)

* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note (2)

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Note (3)

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Note (4)

Spark arrestor performance as standard Meets performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Maximum Gross Power - 164hp

Rated Net Power - 157hp

Maximum Rated Gross Power - Iso 14396 (Din) - 166hp

Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)

1800rpm

Maximum Rated Gross Power - Iso 14396

164hp

Maximum Rated Gross Power - Iso 14396 (Performance Power Mode: Range 1-4)

164hp

Maximum Rated Gross Power - Iso 14396 (Din) (Performance Power Mode: Range 1-4)

166hp

Rated Net Power - 1,800 Rpm - Sae J1349 At Minimum Fan Speed (Performance Power Mode: Range 1-4)

157hp

Rated Net Power - 1,800 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Performance Power Mode: Range 1-4)

160hp

Rated Net Power - 1,800 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Performance Power Mode: Range 1-4)

162hp

Maximum Gross Torque - Iso 14396 (Performance Power Mode: Range 1-4)

592lb ft

Maximum Net Torque - Sae J1349 (Performance Power Mode: Range 1-4)

566lb ft

Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Performance Power Mode: Range 1-4)

572lb ft

Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)

1600rpm

Maximum Rated Gross Power - Iso 14396 (Standard Power Mode: Range 1-3*)

160hp

Maximum Rated Gross Power - Iso 14396 (Din) (Standard Power Mode: Range 1-3*)

162hp

Rated Net Power - 1,600 Rpm - Sae J1349 At Minimum Fan Speed (Standard Power Mode: Range 1-3*)

154hp

Rated Net Power - 1,600 Rpm - Iso 9249 (1977)/Eec 80/1269 At Minimum Fan Speed (Standard Power Mode: Range 1-3*)

156hp

Rated Net Power - 1,600 Rpm - Iso 9249 (Din) At Minimum Fan Speed (Standard Power Mode: Range 1-3*)

158hp

Maximum Gross Torque - Iso 14396 (Standard Power Mode: Range 1-3*)

592lb ft

Maximum Net Torque - Sae J1349 (Standard Power Mode: Range 1-3*)

566lb ft

Maximum Net Torque - Iso 9249 (1977)/Eec 80/1269 (Standard Power Mode: Range 1-3*)

572lb ft

Operational

Operating Weight - 30879lb

Power Train

Front Axle - Fixed

Rear Axle - Oscillating

Front Axle - Traction Aid - Standard

Locking differential

Rear Axle - Traction Aid - Optional

Limited slip differential

Note (1)

Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Note (2)

Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.

Brakes - Parking

Spring applied hydraulically released

Brakes - Service

Inboard wet disc

Rear Axle - Oscillation Angle By Tire Size - 20.5 R25, 550/65, 600/65, 650/65

10.5 degrees

Rear Axle - Oscillation Angle By Tire Size - Solid Tires, 750/65, 620/65, Skidder

7 degrees

Transmission

Note

* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Steering

Maximum Working Pressure - Steering Pump

3500 psi

Steering Cylinder, Double Acting - Bore Diameter

2.8in

Steering Cylinder, Double Acting - Rod Diameter

1.6in

Steering Cylinder, Double Acting - Stroke

17.2in

Maximum Steering Torque - 0 Degrees (Straight Machine)

37155lb ft

Maximum Flow - Steering Pump

34 gal/min

Maximum Steering Torque - 40 Degrees (Full Turn)

27747lb ft

Steering Cycle Times - Full Left To Full Right - Minimum Rpm: Pump Flow Limited

2.8 s

Steering Cycle Times - Full Left To Full Right - Maximum Rpm: 90 Rpm Steering Wheel Speed

2.4 s

Note (1)

Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Note (2)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Transmission

Forward And Reverse - Range 1*

1-13 km/h (0.6-8 mph)

Forward And Reverse - Range 2

8mph

Forward And Reverse - Range 3

17mph

Forward And Reverse - Range 4

25mph

Buckets

Bucket Capacities

2.1-5.0 m3 (2.7-6.5 yd3)

Operating Specifications

Full Turn Tip Load

18670lb

Service Refill Capacities

Cooling System - 7.9gal

Fuel Tank - 51.5gal

Hydraulic Tank - 23.8gal

Hydraulic System - Including Tank - 43.6gal

Engine Crankcase - 5.3gal

Transmission - Gear Box - 2.2gal

Diesel Exhaust Fluid (Def) Tank - 5gal

Front Axles - 6.9gal

Rear Axles - 6.6gal

Cab

Rops - ISO 3471: 2008

Fops - ISO 3449: 2005 LEVEL II

Note (1)

Declared sound levels per ISO 6396:2008* while in Performance Power Mode: Standard cab: 68 3 dB(A) and Deluxe cab

Note (2)

* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.

Loader Hydraulic System

Lift Cylinder, Double Acting - Stroke - 28.7in

Tilt Cylinder, Double Acting - Stroke - 21.9in

Maximum Flow - Implement Pump - 50 gal/min

Note (1)

* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Note (2)

Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Note (3)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Maximum Working Pressure - Implement Pump

3626 psi

Lift Cylinder, Double Acting - Bore Diameter

4.7in

Lift Cylinder, Double Acting - Rod Diameter

2.6in

Tilt Cylinder, Double Acting - Bore Diameter

5.9in

Tilt Cylinder, Double Acting - Rod Diameter

3.5in

Relief Pressure - Tilt Cylinder

4061 psi

Maximum Flow - Implement Pump - 3rd Function*

50 gal/min

Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Raise (Ground Level To Maximum Lift)

5.1/5.7 seconds

Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Dump (At Maximum Lift Height)

1.5/1.7 seconds

Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Float Down (Maximum Lift To Ground Level)

2.7/2.7 seconds

Cycle Times - Performance (Hp+) At 1,800 Rpm/Standard Power Mode At 1,600 Rpm - Total Cycle Time

9.3/10.1 seconds

Maximum Flow - Implement Pump - 4th Function Maximum Flow*

42 gal/min

Relief Pressure - Tilt Cylinder - 3rd And 4th Function Maximum Working Pressure

3626 psi

Relief Pressure - Tilt Cylinder - 3rd And 4th Function Relief Pressure

4061 psi

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Price

The cost of purchasing a new Caterpillar 930M is $195,500. The cost to rent the machine for a day is $1,770, for a half-day it is $885, and for a week it is $4,420. The estimated monthly maintenance costs are approximately $1,000, while the estimated fuel cost per month is around $3,500. The hourly fuel cost estimation is around $50.

Maintenance Costs

The monthly maintenance costs for the 930M are approximately $1,000. This includes regular maintenance, such as oil and filter changes, as well as other necessary repairs and replacements. The estimated fuel cost per month is around $3,500. This includes the cost of fuel, as well as any necessary additives. The hourly fuel cost estimation is around $50.

Similar Models

If you are looking for a similar model to the Caterpillar 930M, there are several other options available. The Caterpillar 930K is a similar model with a slightly smaller operating weight, while the Caterpillar 930K XE is a more powerful model with a larger operating weight. The Caterpillar 930K XE is also equipped with a more powerful engine and a larger lift capacity. Other similar models include the Caterpillar 938K, the Caterpillar 950M, the Caterpillar 938G, the Caterpillar 926M, the Caterpillar 950M XE, and the Caterpillar 950M XE Plus.

Conclusion

The Caterpillar 930M is a great choice for a variety of applications, from construction sites to agricultural operations. Its impressive lift capacity and maneuverability make it ideal for a variety of tasks, while its fuel efficiency and low operating costs make it an attractive choice for any business. If you are looking for a similar model to the 930M, there are several other options available, including the Caterpillar 930K, the Caterpillar 930K XE, the Caterpillar 950M, the Caterpillar 950M XE, and the Caterpillar 950M XE Plus.