The New Holland C337: At a Glance

• Enclosed Cab

• HVAC

• LCD Display with Rear Camera

• Glass Door

• Lap Bar

• Air Suspension Seat

• Hydraulic Coupler

• High Flow AUX

• 2 Speed EH Controls

• 17.7" Tracks

New Holland C337: Key Features

New Creep Mode. For even more productivity, available creep mode (EH models only) lets you trench, cold-plane or cut brush with greater precision at slower speeds. For intense load-and-carry operations, the optional Glide Ride feature prevents loads from shifting during transport.

8” LCD Multifunction Display makes operation easier. The new, customizable 8” LCD Multifunction Display with an integrated back-up camera gives you a quick, convenient look at engine settings and performance information, all while providing even greater visibility to the rear of the loader for better operating efficiency and safety.

Wide, comfortable cab with superior visibility. The 300 Series cab is one of the widest in the industry. It’s quiet, easy to enter and exit, and provides a clear view in all directions, even to the raised bucket or attachments. You get an unprecedented view out the back thanks to the 8” LCD Multifunction Display, the large rear window, low engine hood and no rear frame towers. The fully sealed and pressurized cab minimizes dust and exhaust infiltration.

Finish jobs faster with Super Boom®. The Super Boom® vertical lift linkage provides more dump height and reach, so you can load material into the center of high-sided truck boxes or hoppers. But, it also maximizes visibility, providing a clear view to the cutting edge, to the bucket at full height, and to the sides and rear.

Power through tough jobs. The reliable hydraulic system delivers fast cycle times. In-line hydraulic pumps produce less noise and provide extra-smooth operation. Add the optional high-flow hydraulics to run attachments hour after hour. New Holland Tier 4 Final engines deliver powerful performance, use less fuel and are easy to maintain to decrease your operating costs.

Smooth ride, longer life. The low-profile track undercarriage makes cleanout easier, reduces noise and increases durability. It also provides a smoother ride, thanks to steel-embedded tracks rolling on the rubber instead of steel. Fewer moving parts than competitive designs mean less complexity—and complications—which adds up to longer track life.

Easy access, simplified service. All daily service points are grouped together and the rear door and hood make it easy to get to them without tools. If ever needed, the entire cab can be tilted forward for unrivaled access to components and easy cab cleanout.

C337 Specs: A Closer Look

Engine

Manufacturer/model FPT / F5BFL463A*F001

Bore/stroke, in (mm)3.9 x 4.3 (99 x 110)

Displacement, in3 (L)207.5 (3.4)

Fuel injection HPCR Direct

Air intake Turbocharged Aftercooled with external EGR

Horsepower per SAE J1349 Gross hp (kW)74 (55) @ 2500 rpm

Horsepower per SAE J1349 Net hp (kW)68 (51) @ 2500 rpm

Peak torque, lb-ft (Nm)232 (314) @ 1400 rpm

Power Train

Travel speed, low range, mph (km/h) 5.5 (8.9)

Travel speed, high range (optional), mph (km/h) 8.0 (12.9)

Dimensions

Bucket hinge pin, in (mm) 131.1 (3330)

Top of ROPS, in (mm) 80.4 (2043)

Bottom of level bucket, fully raised, in (mm) 123.0 (3125)

Overall length without attachment with coupler, in (mm) 117.6 (2986)

Dump angle, degrees 55

Dump reach (max height), in (mm) 34.4 (875) @ 45°

Rollback, bucket on ground, degrees 33

Rollback, bucket at full height, degrees 85

Track on ground, in (mm) 64.5 (1639)

Ground clearance (bottom of belly pan), in (mm)9.5 (243)

Angle of departure, degrees 32

Clearance circle without bucket, in (mm) 56.2 (1482)

Clearance circle rear, in (mm) 67 (1702)

Overall width, in (mm) 76.5 (1943))

Ground pressure, PSI (with spec belt) 4.2

Hydraulic System

Pump Flow, gpm (Lpm)24.2 (91.5)

Optional High Flow, gpm (Lpm)37.6 (142.5)

Relief Pressure, psi (bar)3,046 (210)

Performance Specs

Rated Operating Load @50% tip, lbs (kg) 3700 (1678)

Rated Operating Load @ 35% tip, lbs (kg) 2590 (1178)

Tipping Load, lbs (kg) 7400 (3357)

Breakout Force, lift cylinder, lbs (kN) 6110 (27.2)

Breakout force bucket cylinder, lbs (kN)7360 (32.7)

Operating Weight, lbs (kg) 9945 (4520)

Common Uses of the New Holland C337

The New Holland C337 is a great choice for a variety of tasks. This machine can be used for digging, grading, loading, and hauling, making it a great choice for any job site. The C337 is also great for landscaping projects, as it can be used to move large amounts of dirt and debris quickly and efficiently. This machine is also great for agricultural tasks, such as loading hay bales and moving heavy equipment around the farm.

Pricing Information

The New Holland C337 can be purchased for $80,000. For those who need to rent the machine, the cost is $375 for a full day, $188 for a half-day, and $1100 for a week.

Operating Weight and Maintenance Costs

The New Holland C337 has an operating weight of 9945 pounds. The estimated monthly maintenance costs for this machine are approximately $250.

Fuel Cost Estimates

The estimated fuel cost per month for the New Holland C337 is approximately $350. The estimated hourly fuel cost for this machine is $7.50.

Similar Models

If you're looking for a similar machine to the New Holland C337, there are a few other models to consider. The Bobcat S650 and the Caterpillar 299D2 are both great choices for a powerful and versatile skid steer loader. These are the other models also available New Holland C345 and New Holland L218.

Conclusion

The New Holland C337 skid steer loader is a reliable workhorse that delivers high performance in all conditions. This model is built on the strength, visibility, power and smooth ride you've come to expect from New Holland track loaders. It features a wide, comfortable cab with superior visibility.
Its reliable hydraulic system delivers fast cycle times to power through tough jobs. With its impressive power and performance, the C337 is sure to get the job done quickly and efficiently. If you're looking for a similar machine, the Bobcat S650 and the Caterpillar 299D2 are both great choices.