No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
This 1977 Cat D9H Dozers is being sold from a top tier rental company. The last reported number of hours was 8375. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
180 in Wide U-Blade w/ Single Tilt
4 Cylinder Multi-Shank Ripper
27 in Single Grouser Track Shoes
Serial Number / VIN: 90V05281
CE Mark: No CE mark found
Hour Meter / Odometer: 8375 hrs, Meter inoperable
Sheet Metal (fiberglass) Condition: Damaged cab window hinge, cracks, weld repairs
Exterior Lights: Not operational
Horn: Inoperable
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The gauge registers in the operating range.
Gauges: Hydraulic fluid temp, water temp & water pressure gauges are inoperable
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Drive Motors: Dripping Leak
Final Drives: Dripping Leak
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Hoses (Hydraulics): Cracking, wear
Blade Lift Cylinders: Dripping leak on the left cylinder, Dripping leak on the right cylinder, Heavy pin and bushing movement, Drift down
Blade Tilt Cylinders: Heavy pin and bushing movement
Limited Function Check: The hydraulic system was operational. Hydraulics will not hold position on blade.
Tilt Linkage Pins and Bushings: Heavy movement
Angle Linkage Pins and Bushings: Heavy movement
Blade Trunnions/bushings: Heavy movement
Limited Function Check (dozer): The main components were operational with movement as indicated.
Left Track Tensioner: Covered
Left Grouser Height: 66 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 67 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
9236 hours
$145,000
6023 hours
$39,900
5746 hours
$126,784
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
1137 hours
$100,000
5285 hours
$42,500
20551 hours
$42,500
9236 hours
$145,000
6023 hours
$39,900
5746 hours
$126,784
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
1137 hours
$100,000
5285 hours
$42,500
20551 hours
$42,500