IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
1990 Cat D8N Crawler Dozer The last reported number of hours was 11759. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
156 in Wide Semi-U Blade w/ Single Tilt
Cat 58N Winch
28 in Single Grouser Track Shoes
Engine Power: 285 hp
Displacement: 640 cu in
Operating Weight: 82,590 lbs
Fuel Capacity: 115 gal
Blade Capacity: 12.9 yd³
Blade Width: 15 ft
Transmission Type: Powershift
Number of Forward Gears: 3
Number of Reverse Gears:
Max Speed - Forward: 6.8 mph
Max Speed - Reverse: 8.4 mph
Ground Pressure: 12.3 psi
Track Gauge: 85 in
Serial Number / VIN: 9TC04723
Hour Meter / Odometer: 11759 hrs
Sheet Metal (fiberglass) Condition: Left side cover is missing
Steps/Ladders: Step missing
Exterior Lights: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational, Check engine light stays on
Gauges: Operational
Air Conditioner: Inoperable
Heater: Inoperable
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
A/C Compressor: Compressor will not engage
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational, Covered
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Pumps (Hydraulics): Covered
Valves: Covered
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Winch: Operational, No hook
Push Arm Pivot/C-FrameTrunnions: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 53 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 53 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
4361 hours
$215,000
24347 hours
$35,000
371 hours
$150,000
2309 hours
$58,500
$220,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
4240 hours
$84,400
View more
4361 hours
$215,000
24347 hours
$35,000
371 hours
$150,000
2309 hours
$58,500
$220,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
4240 hours
$84,400
View more