No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Price excludes taxes, fees, and shipping
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
John Deere 750B Crawler Dozer The last reported number of hours was 4498. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
126 in Wide Straight Blade 22 in Single Grouser Track Shoes
Engine Power: 131 hp
Displacement: 276 cu in
Net Torque: 379 lb-ft
Operating Weight: 26,070 lbs
Fuel Capacity: 48 gallons
Blade Width: 10 ft 1 in
Blade Height: 3 ft 9 in
Track Width: 20 in
Maximum Speed - Forward: 5.7 mph
Maximum Speed - Reverse: 6.8 mph
Ground Pressure: 5.6 psi
Serial Number / VIN: T0750BH770723
Hour Meter / Odometer: 4498 hrs
Travel Alarm: Missing
Horn: Inoperable
Seat Belts: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Limited Function Check: The item was not operational. The main components could not be operationally checked.
Engine: No US EPA Label Present
Blow-by (subjective visual observation): Couldn’t check
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting. The engine ran for a short time then shutdown.
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load., Was able to move the machine a short distance before the engine shutdown.
Hydraulic Tank: Not visible
Hoses (Hydraulics): Cracked with wear
Blade Lift Cylinders: Dripping leak on the left cylinder, Dripping leak on the right cylinder
Blade Angle Cylinders: Dripping leak on the left cylinder, Dripping leak on the right cylinder
Blade Tilt Cylinders: Dripping leak
Limited Function Check: The hydraulic system was not operational.
Blade Cutting Edge Condition: Missing part of cutting edge
Limited Function Check (dozer): The unit could not be started and run; several components could not be checked.
Frame Condition: Rusted
Pivot Shafts: Rusted with wear
Left Grouser Height: 37 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 37 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
5259 hours
$140,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
8922 hours
$72,000
5868 hours
$200,000
1062 hours
$170,000
3358 hours
$86,554
3773 hours
$30,000
View more
5259 hours
$140,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
8922 hours
$72,000
5868 hours
$200,000
1062 hours
$170,000
3358 hours
$86,554
3773 hours
$30,000
View more