No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
1998 Cat D8R Crawler Dozer The last reported number of hours was 178. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
156 in Wide Semi-U Blade w/ Single Tilt
4 Cylinder Multi-Shank Ripper
24 in Single Grouser Track Shoes
SystemOne Undercarriage
Serial Number / VIN: 7XM03112
Hour Meter / Odometer: 178 hrs
Indication of Additional Hours: There is an hour meter replacement/change label that has the following reading on it: 2772
Glass: Door windows are cracked
Exterior Lights: Some not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Fuel gauges are inoperable
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: US EPA Label not legible
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Auxiliary Hydraulic Plumbing: Operational, Rear
Blade Lift Cylinders: Dripping leak on the left cylinder, Dripping leak on the right cylinder
Ripper Cylinders: Dripping leak on the left cylinder, Dripping leak on the right cylinder
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Push Arm Pivot/C-FrameTrunnions: Shims remaining
Tilt Linkage Pins and Bushings: Shims remaining
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 40 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 40 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
5088 hours
$70,000
3034 hours
$150,400
4591 hours
$75,400
5504 hours
$225,000
8019 hours
$151,500
382 hours
$205,000
8573 hours
$130,000
1063 hours / 228 miles
$104,742
View more
5088 hours
$70,000
3034 hours
$150,400
4591 hours
$75,400
5504 hours
$225,000
8019 hours
$151,500
382 hours
$205,000
8573 hours
$130,000
1063 hours / 228 miles
$104,742
View more