No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2000 Cat D10R Crawler Dozer The last reported number of hours was 9517. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
189 in Wide Semi-U Blade w/ Single Tilt
4 Cylinder Single-Shank Ripper
24 in Single Grouser Track Shoes
Serial Number / VIN: 3KR01525
CE Mark: No CE mark found
Hour Meter / Odometer: 9517 hrs
Exterior Lights: Not operational
Travel Alarm: Operational
Horn: Inoperable
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational, Check engine light stays on
Gauges: Operational
Air Conditioner: The ambient temperature is too cold to check
Heater: Inoperable, No fan speeds operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
A/C Compressor: In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation): Minor
Starter: Operational
Exhaust System: Exhaust leak possible.
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Blade Lift Cylinders: Heavy pin and bushing movement
Ripper Cylinders: Fluid accumulation around seals
Limited Function Check: The hydraulic system was operational. There are leaks around the belly pan and transmission and the source is unknown.
Blade Condition: Minor play in pins and bushings
Blade Cutting Edge Condition: Reversible-turned
Ripper Condition: Heavy play in pins and bushings
Push Arm Pivot/C-FrameTrunnions: Shims remaining
Tilt Linkage Pins and Bushings: Shims remaining, Play in trunnions on tilt linkage
Blade Trunnions/bushings: Minor play in blade
Limited Function Check (dozer): The main components were operational with movement as indicated.
Left Grouser Height: 54 mm
Left Track Bushings: Bushings have been turned
Right Grouser Height: 58 mm
Right Track Bushings: Bushings have been turned
For your convenience, we've included these documents free to download so you can make the best decision.
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
9236 hours
$85,645
19603 hours
$259,995
1829 hours
$141,900
5278 hours
$306,085
404 hours
$175,200
3565 hours
$453,750
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
9236 hours
$85,645
19603 hours
$259,995
1829 hours
$141,900
5278 hours
$306,085
404 hours
$175,200
3565 hours
$453,750