No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
The last reported number of hours was 6756. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Auxiliary Hydraulics
100 in Multi-Purpose Bucket
Counterweight
Rear Auxiliary Hydraulics
22 in Double Grouser Track Shoes
Serial Number / VIN: CAT0963DELCS00736
Hour Meter / Odometer: 6756 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: Yes
Current Operator/Maintenance Manual: Yes
Hydraulic Controls: Electrical tape wrapped around grip/control
3rd Valve: Equipped with a 3rd valve and plumbing for an auxiliary attachment., Front multipurpose bucket cylinders (operational), plumbed for rear ripper w/control (no ripper, not functionally tested)
Oil Pressure: The gauge registers in the operating range.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Hoses (Hydraulic): Some heavy abrasions, no observed dripping leaks
Auxiliary Hydraulic Plumbing: Operational, Front, Rear, Plumbed directly to multipurpose bucket cylinders, no couplers at front, capped off at rear.
Bucket Tilt Cylinders: Dripping leak
Limited Function Check: The hydraulic system was operational.
Belly Pans: Some minor denting, some non dripping oily accumulation at underside from unknown source.
Limited Function Check: The main chassis components were operational in a limited check.
Loader Bucket Cutting Edge: Reversible-turned, Significant wear at sections between teeth which are reversible and not turned. Lower blade edge shown and rated in main picture.
Left Grouser Height: 38 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 38 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.