No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
This 2011 Case CX160B Excavators is being sold from a top tier rental company. The last reported number of hours was 4246. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Air Conditioner
Control Pattern Changer
2011 US EPA Label
8 ft 7 in Stick
24 in Triple Grouser Track Shoes
Hydraulic Quick Coupler
36 in Digging Bucket
Hydraulic Thumb
Serial Number / VIN: DAC160K5NBSAF1682
CE Mark: No CE mark found
Hour Meter / Odometer: 4246 hrs
Glass: Front lower glass replaced with plexiglass
Exterior Lights: Some not operational, Left boom light broken
Travel Alarm: Inoperable
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Swing Brake: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: No oil pressure indicator
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2011 US EPA Label
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Radiator: GOOD
Oil Leaks: Valve cover
Limited Function Check: After jump starting, the engine ran. After engine is to operating temperature and shut down, it is difficult to restart.
Limited Function Check: The drivetrain was operational.
Hydraulic Tank: Fluid accumulation around sight glass
Auxiliary Hydraulic Plumbing: Operational, End of boom
Hydraulic Center Swivel: Covered
Bucket Cylinder: Seepage around seal
Limited Function Check: The hydraulic system was operational.
Boom Condition: Weld repair, Plated, Bottom side dented and hole in plate
Stick Condition: Weld repair, Plated, Cracked
Boom Base Pin and Bushings: Heavy movement
Pins and Bushings Stick to Coupler: Heavy movement
Limited Function Check: The main components were operational in a limited check.
Left Grouser Height: 23 mm
Right Grouser Height: 23 mm
Quick Coupler: Operational
Thumb: Hydraulic thumb, Welded repair on pin bushing, Two outer teeth welded on, Two inner teeth missing and cut off, Heavy pin movement
For your convenience, we've included these documents free to download so you can make the best decision.
7099 hours
$53,550
6453 hours
$99,500
$135,750
9322 hours
$234,750
2756 hours / 19 miles
$154,354
11710 hours
$34,995
1452 hours
$164,995
5387 hours
$102,500
7099 hours
$53,550
6453 hours
$99,500
$135,750
9322 hours
$234,750
2756 hours / 19 miles
$154,354
11710 hours
$34,995
1452 hours
$164,995
5387 hours
$102,500