No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
This 2011 Komatsu PC88MR-8 Excavators is being sold from a top tier rental company. The last reported number of hours was 5547. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Air Conditioner
Control Pattern Changer
2011 US EPA Label
Swing Boom
7 ft 4 in Stick
Auxiliary Hydraulic Plumbing
Backfill Blade
Track Shoes w/Rubber Pads
25 in Digging Bucket
Serial Number / VIN: KMTPC205H01005665
CE Mark: No CE mark found
Hour Meter / Odometer: 5547 hrs
Sheet Metal (fiberglass) Condition: The cab door has been damaged and does not operate smoothly.
Exterior Lights: Not operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Inoperable
Heater: Inoperable
Limited Function Check: The main components are in place and operational as noted.
Engine: 2011 US EPA Label
A/C Compressor: Compressor will not engage
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran. One of the engine belts squealed intermittently.
Limited Function Check: The drivetrain was operational.
Auxiliary Hydraulic Plumbing: Capped off, Not operationally checked, End of stick
Boom Lift Cylinder(s): Damaged guard
Limited Function Check: The hydraulic system was operational.
Limited Function Check: The main components were operational in a limited check.
Left Grouser Height: 9 mm
Right Grouser Height: 9 mm
Excavator Bucket Condition: Worn through wear plate on the bottom
Cutting Edge / Teeth / Adapters: Cutting edge welded directly to adapters.
date of analysis: Apr 02, 2025
Silicon: 8.19 PPM
Tin: 2.51 PPM
Silver: 0 PPM
Aluminum: 1.95 PPM
Chromium: 4.16 PPM
Lead: 5.5 PPM
Copper: 0.95 PPM
Nickel: 0.86 PPM
Iron: 42.81 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
date of analysis: Apr 02, 2025
Silicon: 11.19 PPM
Tin: 1.94 PPM
Silver: 0.01 PPM
Aluminum: 2.48 PPM
Chromium: 0.41 PPM
Lead: 0.51 PPM
Copper: 33.08 PPM
Nickel: 0.15 PPM
Iron: 10.55 PPM
Glycol: N/A
Water: N/A
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
6453 hours
$99,500
782 hours
$74,100
$40,000
2756 hours / 19 miles
$154,354
1452 hours
$164,995
5387 hours
$102,500
4583 hours / 274 miles
$130,536
3919 hours / 121 miles
$138,937
6453 hours
$99,500
782 hours
$74,100
$40,000
2756 hours / 19 miles
$154,354
1452 hours
$164,995
5387 hours
$102,500
4583 hours / 274 miles
$130,536
3919 hours / 121 miles
$138,937