No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2012 Cat D6N LGP Crawler Dozer The last reported number of hours was 14883. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Fire Suppression System
Tier 4
159 in Wide PAT Blade
34 in Single Grouser Track Shoes
Engine Power: 150 hp
Displacement: 414 in³
Operating Weight: 36,943 lb
Fuel Capacity: 79 gal
Blade Width: 156 in
Blade Capacity: 5.3 yd³
Track Width: 34 in
Maximum Forward Speed: 5.6 mph
Maximum Reverse Speed: 6.2 mph
Ground Pressure: 4.7 psi
Ground Contact Area: 7,660 in²
Height to Top of Cab: 109 in
Length w/o Blade: 182 in
Undercarriage Track Gauge: 106 in
Standard Ripper Type: Multi-Shank
Serial Number / VIN: PBA00520
CE Mark: No CE mark found
Hour Meter / Odometer: 14883 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Inoperable
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational, Park brake fault light stays on
Gauges: Operational
Air Conditioner: The ambient temperature is too cold to check
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
A/C Compressor: In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation): Significant
Starter: Operational
Oil Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Limited Function Check (dozer): The main components were operational in a limited check.
Pivot Shafts: Heavy wear
Equalizer Bar Pivot Points: Heavy wear
Left Grouser Height: 50 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 52 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
5088 hours
$70,000
3034 hours
$150,400
5504 hours
$225,000
8019 hours
$151,500
9668 hours
$171,000
382 hours
$205,000
8573 hours
$130,000
1063 hours / 228 miles
$104,742
View more
5088 hours
$70,000
3034 hours
$150,400
5504 hours
$225,000
8019 hours
$151,500
9668 hours
$171,000
382 hours
$205,000
8573 hours
$130,000
1063 hours / 228 miles
$104,742
View more