No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Price excludes taxes, fees, and shipping
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2013 Sennebogen 860 Wheel Material Handler The last reported number of hours was 29102. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Air Conditioner
Straight Travel Pedal
Hydraulic Cab Riser
Cab Screens
Rear View Camera
35 ft 5 in Boom
25 ft 7 in Stick
Front and Rear Stabilizers
16.00-25 Tires
Baldor 25 Kw Generator
Auto Lube
Serial Number / VIN: 860.0.1052
Hour Meter / Odometer: 29102 hrs
Steps/Ladders: Damaged steps
Glass: Cracked glass
Exterior Lights: Not operational
Seat Belts: Operational
Current Operator/Maintenance Manual: Yes
Warning Lights: Operational, Hydraulic light stays on
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
A/C Compressor: Operational
Blow-by (subjective visual observation): Significant
Starter: Operational
Oil Leaks: No dripping leaks
Limited Function Check: After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.
Limited Function Check: The drivetrain was operational., The drivetrain was very minimally operationally checked due to unit in rocks.
Swing Motor: Very minimally checked
Hydraulic Center Swivel: Dripping leak
Limited Function Check: The hydraulic system was operational. The hydraulic system was very minimally checked.
Boom Base Pin and Bushings: Heavy movement
Pin and Bushings Boom to Stick: Some movement
Pin and Bushings Stick to Bucket: Not operationally checked
Pins and Bushings Stick to Coupler: Not operationally checked
Turntable Bearing: Heavy movement
Stabilizers: Operational, Worn pivot points
Limited Function Check: The main components were operational with damage as noted.
Limited Function Check: The main chassis components functioned with wear in the pivot points.
Generator: Not operationally checked, some control panel parts are missing
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
999 hours
$2,900
3044 hours
$36,000
4 hours
$125,000
513 hours
$57,000
2647 hours
$8,800
403 hours
$15,689
158 hours
$4,054
1 hours
$25,000
View more
999 hours
$2,900
3044 hours
$36,000
4 hours
$125,000
513 hours
$57,000
2647 hours
$8,800
403 hours
$15,689
158 hours
$4,054
1 hours
$25,000
View more