IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
This 2015 Genie Z-34/22N is available on Boom & Bucket. The last reported number of hours was 568. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
34 ft 6 in Max Platform Height
500 lb Max Weight Capacity
Jib
Power to Platform
22x7x17 3/4 Non-Marking Tires
Working Height Maximum: 40 ft 6 in
Platform Height Maximum: 34 ft 6 in
Horizontal Reach Maximum: 22 ft 3 in
Up And Over Clearance Maximum: 15 ft 3 in
Platform Capacity: 500 lb
Platform Length: 2 ft 6 in
Platform Width: 4 ft 8 in
Height Stowed: 6 ft 7 in
Length Stowed: 18 ft 9 in
Storage Height: 7 ft 5 in
Storage Length: 13 ft 9 in
Overall Width: 4 ft 10 in
Wheelbase: 6 ft 2 in
Ground Clearance: 5.5 in
Platform Rotation: 180°
Serial Number / VIN: Z34N15-12229
Hour Meter / Odometer: 568 hrs
Sheet Metal (fiberglass) Condition: Damage
Hand Rails: Bent railing
Travel Alarm: Operational
Horn: Operational
Swing Brake: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: Yes
ANSI Guidelines: Yes
Limited Function Check: The main components are in place and operational as noted.
Emergency Shut Off Switch: Operational
Safety Control Hand/Foot Switch: Operational
Engine Warning Lights: Operational
Limited Function Check: The main components are in place and operational as noted.
Operating Voltage: 48 Volts
Battery Condition: Functioned during the inspection
Battery Charger: Appears normal - Not operationally checked, 100-240 Volt
Limited Function Check: The electrical system was operational.
Limited Function Check: The drivetrain was operational.
Hoses (Hydraulic): Leak near basket rotator motor
Basket Rotator Motor: Dripping leak, Slow Dripping leak near hose/fitting
Limited Function Check: The hydraulic system was operational.
Brake System: The brake system functioned, stopping and holding the machine.
Turntable Bearing: Heavy movement
Boom Wear Guides: Damage/significant wear
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
706 hours
$20,968 USD
1842 hours / 32 miles
$62,183 USD
2061 hours / 81 miles
$61,441 USD
3389 hours / 35 miles
$42,590 USD
3685 hours / 20 miles
$42,590 USD
2532 hours / 8 miles
$60,090 USD
1209 hours / 47 miles
$61,575 USD
1218 hours / 8 miles
$61,961 USD
View more
706 hours
$20,968 USD
1842 hours / 32 miles
$62,183 USD
2061 hours / 81 miles
$61,441 USD
3389 hours / 35 miles
$42,590 USD
3685 hours / 20 miles
$42,590 USD
2532 hours / 8 miles
$60,090 USD
1209 hours / 47 miles
$61,575 USD
1218 hours / 8 miles
$61,961 USD
View more