IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2015 John Deere 1050K Crawler Dozer The last reported number of hours was 5001. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Tier 4
2015 US EPA Label
Requires Diesel Exhaust Fluid
156 in Wide Semi-U Blade w/ Dual Tilt
2 Cylinder Single-Shank Ripper w/Hydraulic Pin Puller
24 in Single Grouser Track Shoes
Engine Power: 350 hp
Net Power: 261 kW
Displacement: 763 cu in
Operating Weight: 95,000 lbs
Fuel Capacity: 165 gal
Blade Capacity: 7.9 cu yd
Track Width: 24 in
Ground Clearance: 19.5 in
Width Over Tracks: 10.5 ft
Height to Top of Cab: 11.3 ft
Length of Track on Ground: 12 ft
Maximum Forward Speed: 7.2 mph
Maximum Reverse Speed: 8.5 mph
Serial Number / VIN: 1T01050KHFF282155
Hour Meter / Odometer: 5001 hrs
Exterior Lights: Some not operational
Travel Alarm: Inoperable
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The gauge registers in the operating range.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2015 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Hoses (Hydraulics): Tilt cylinder supply line is leaking.
Limited Function Check: The hydraulic system was operational.
Push Arm Pivot/C-FrameTrunnions: Shims remaining
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 63 mm
Left Track Bushings: Bushings have been turned
Right Grouser Height: 63 mm
Right Track Bushings: Bushings have been turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
6967 hours
$119,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
3938 hours
$150,000
13049 hours
$90,000
13004 hours
$105,000
19565 hours
$200,000
5867 hours
$105,000
View more
6967 hours
$119,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
3938 hours
$150,000
13049 hours
$90,000
13004 hours
$105,000
19565 hours
$200,000
5867 hours
$105,000
View more