No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2015 Weiler P385A Track Asphalt Paver The last reported number of hours was 2648. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Dual Controls
Diesel Heated 8 ft - 16 ft Screed
On Board Generator
Trimble Ultrasonic Sensors
12 in Triple Grouser Track Shoes w/Rubber Inserts
Engine Power: 131 hp
Engine Displacement: 276 cu in
Operating Weight: 19400 lb
Fuel Tank Capacity: 45 gal
Standard Paving Width: 8 ft - 15 ft 6 in
Maximum Paving Width: 15 ft 6 in
Paving Speed: 0 - 82 ft/min
Travel Speed: 0 - 10 mph
Hopper Capacity: 14.4 tons
Hopper Width: 10.5 ft
Material Thickness: Up to 12 in
Engine Manufacturer: Caterpillar
Engine Model: C4.4
Grade Control: Automatic
Conveyor System: Dual Bar Type
Serial Number / VIN: P385A-1695
Hour Meter / Odometer: 2648 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: Yes
Current Operator/Maintenance Manual: Yes
Oil Pressure: The gauge registers in the operating range. 43 PSI
Warning Lights: Operational
Screed Control Switches: Operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.
Left Final Drive: Not visible
Right Final Drive: Not visible
Limited Function Check: The drivetrain was operational.
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: CNV
Screed Heaters: Not operationally checked
Screed Slope Adjustment: Powered adjustment
Screed Crown Adjustment: Manual adjustment
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Limited Function Check: The main components were operational in a limited check.
Left Grouser Height: CNV
Right Grouser Height: CNV
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
450 hours
$225,000
5652 hours
$52,467
3003 hours
$89,900
4468 hours
$34,900
1994 hours
$129,900
2888 hours
$39,900
1381 hours
$132,700
1561 hours
$169,900
View more
450 hours
$225,000
5652 hours
$52,467
3003 hours
$89,900
4468 hours
$34,900
1994 hours
$129,900
2888 hours
$39,900
1381 hours
$132,700
1561 hours
$169,900
View more