No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Price excludes taxes, fees, and shipping
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2017 Hamm H10i Smooth Drum Compactor The last reported number of hours was 3760. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Open Operator Station
2016 US EPA Label
Deutz TCD3.6 L4 4 Cylinder 114 hp 3.62 L Diesel Engine
Requires Diesel Exhaust Fluid
84 in Drum
Engine Power: 131 hp
Displacement: 276 cu in
Operating Weight: 21,500 lbs
Fuel Tank Capacity: 66 gal
Drum Width: 84 in
Drum Diameter: 59 in
Vibration Frequency: 30 Hz
Centrifugal Force per Drum: 50,700 lbs
Maximum Travel Speed: 6 mph
Gradeability without Vibration: 35%
Serial Number / VIN: H2350086
Hour Meter / Odometer: 3760 hrs
Exterior Lights: Some not operational, Left rear light not operational
Travel Alarm: Inoperable
Horn: Inoperable
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Seats/Armrests: Torn seat cover, damaged bottom seat cushion
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Emissions Status: 2016 US EPA Label
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Rear Drive Axle: Not visible
Limited Function Check - Compaction: The drivetrain was operational without a load.
Limited Function Check: The hydraulic system was operational.
Limited Function Check (roller): The main chassis components were operational.
date of analysis: May 29, 2026
Silicon: 3.31 PPM
Tin: 1.27 PPM
Silver: 0 PPM
Aluminum: 2.4 PPM
Chromium: 1.06 PPM
Lead: 0.69 PPM
Copper: 0.77 PPM
Nickel: 0.41 PPM
Iron: 14.2 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
536 hours
$10,900
294 hours
$11,400
1076 hours
$102,900
776 hours
$7,095
7 hours
$3,986
3567 hours
$99,750
2802 hours
$11,500
$45,000
View more
536 hours
$10,900
294 hours
$11,400
1076 hours
$102,900
776 hours
$7,095
7 hours
$3,986
3567 hours
$99,750
2802 hours
$11,500
$45,000
View more