IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2017 John Deere 245G LC Tracked Excavator The last reported number of hours was 3734. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Air Conditioner
Control Pattern Changer
Rear View Camera
2016 US EPA Label
Requires Diesel Exhaust Fluid
9 ft 6 in Stick
Auxiliary Hydraulic Plumbing
31.5 in Triple Grouser Track Shoes
Hydraulic Quick Coupler
38.5 in Digging Bucket
Hydraulic Thumb
Serial Number / VIN: 1FF245GXAGF800143
CE Mark: No CE mark found
Hour Meter / Odometer: 3734 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Swing Brake: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: No oil pressure indicator
Warning Lights: Operational
Gauges: Operational
Air Conditioner: The ambient temperature is too cold to check
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2016 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Hydraulic Control Pattern Changer: Not tested
Auxiliary Hydraulic Plumbing: Capped off, End of stick
Limited Function Check: The hydraulic system was operational.
Limited Function Check: The main components were operational in a limited check.
Left Grouser Height: 22 mm
Right Grouser Height: 22 mm
Quick Coupler: Not operationally checked
Thumb: Hydraulic thumb
date of analysis: Sep 16, 2025
Silicon: 5.13 PPM
Tin: 5.92 PPM
Silver: 0.43 PPM
Aluminum: 4.8 PPM
Chromium: 0.43 PPM
Lead: 6.58 PPM
Copper: 0.94 PPM
Nickel: 1.79 PPM
Iron: 9.95 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
286 hours
$81,950
5936 hours
$125,500
2756 hours / 19 miles
$154,354
4583 hours / 274 miles
$130,536
3919 hours / 121 miles
$138,937
3374 hours / 7 miles
$131,818
3533 hours / 64 miles
$131,482
178 hours
$32,500
View more
286 hours
$81,950
5936 hours
$125,500
2756 hours / 19 miles
$154,354
4583 hours / 274 miles
$130,536
3919 hours / 121 miles
$138,937
3374 hours / 7 miles
$131,818
3533 hours / 64 miles
$131,482
178 hours
$32,500
View more