No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2018 Cat D6TXL Crawler Dozer The last reported number of hours was 5556. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Tier 4
Requires Diesel Exhaust Fluid
129 in Wide Semi-U Blade w/ Single Tilt
1 Cylinder Multi-Shank Ripper
Sweeps
24 in Single Grouser Track Shoes
Engine Power: 215 hp
Displacement: 640 cu in
Operating Weight: 46,263 lbs
Fuel Capacity: 115 gal
Blade Capacity: 4.9 cu yd
Blade Width: 13 ft 9 in
Ground Clearance: 1 ft 3 in
Maximum Forward Speed: 6.8 mph
Maximum Reverse Speed: 8.4 mph
Track Width: 24 in
Serial Number / VIN: CAT00D6TC2B300178
Hour Meter / Odometer: 5556 hrs
Exterior Lights: Some not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: Yes
Engine Oil Pressure: Engine oil pressure low
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Blade Lift Cylinders: Dripping leak on the left cylinder
Ripper Cylinders: Heavy pin and bushing movement
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Push Arm Pivot/C-FrameTrunnions: Shims remaining
Tilt Linkage Pins and Bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 56 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 56 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
5088 hours
$70,000
3034 hours
$150,400
10285 hours
$189,000
5504 hours
$225,000
5993 miles
$165,600
9668 hours
$171,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
View more
5088 hours
$70,000
3034 hours
$150,400
10285 hours
$189,000
5504 hours
$225,000
5993 miles
$165,600
9668 hours
$171,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
View more