No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2018 John Deere 1050K Crawler Dozer The last reported number of hours was 10441. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
2018 US EPA Label
Requires Diesel Exhaust Fluid
160 in Wide Semi-U Blade w/ Single Tilt
24 in Single Grouser Track Shoes
Engine Power: 350 hp
Net Power: 350 hp
Operating Weight: 95,000 lbs
Fuel Capacity: 165 gal
Blade Capacity: 7.9 yd³
Blade Width: 156 in
Displacement: 763 cu in
Track Width: 24 in
Length w/o Blade: 193 in
Width Over Tracks: 124 in
Height to Top of Cab: 134 in
Ground Clearance: 24 in
Transmission Type: Hydrostatic
Serial Number / VIN: 1T01050KHJK336711
CE Mark: No CE mark found
Hour Meter / Odometer: 10441 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The gauge registers in the operating range.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted. The start code is 4333
Engine: 2018 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Auxiliary Hydraulic Plumbing: Not operationally checked, Front
Limited Function Check: The hydraulic system was operational.
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 44 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 45 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
5088 hours
$70,000
3034 hours
$150,400
5504 hours
$225,000
8019 hours
$151,500
9668 hours
$171,000
382 hours
$205,000
8573 hours
$130,000
1063 hours / 228 miles
$104,742
View more
5088 hours
$70,000
3034 hours
$150,400
5504 hours
$225,000
8019 hours
$151,500
9668 hours
$171,000
382 hours
$205,000
8573 hours
$130,000
1063 hours / 228 miles
$104,742
View more