2018 Metso LT300HP

6750 hours
Ships nationwide
#A5273191

Asking Price$425,000

Tax Benefits

$89,250

Price with tax savings$335,750

Est. Loan Payment

Price excludes taxes, fees, and shipping

Powerhouse Protection
Our buyer guarantee protects your purchase against anything missed during inspection.
No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.

About this equipment

Metso LT300HP Closed Circuit Cone Crusher The last reported number of hours was 6750. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.

Features

AI-Generated: Verify machine specs, features, and operability prior to purchasing.

US EPA Label
Cat C15 15.2 L Diesel Engine
Requires Diesel Exhaust Fluid
3 ft 10 in x 9 ft 4 in Metso Nordberg HP300 Cone Crusher
47 in Wide Feed Conveyor
31 in Wide Fines Discharge Conveyor
46 in Wide Under Crusher Conveyor
30 in x 39 ft Return conveyor with stand (photographed separately) Conveyor
Radio and Cable Remote Control
Hydraulic Leveling
Triple Grouser Track Shoes
Additional items included. Including 30 in W x 39 ft L return conveyor
USB drive with Operators and Maintenance Manuals
new (green) cone and liner
new tail pulley
orange toolbox with additional parts inside and 1 stack of pallets with misc. items and screens (all photographed)

Specifications

AI-Generated: Verify machine specs, features, and operability prior to purchasing.

Serial Number / VIN: 79003
Hour Meter / Odometer: 6750 hrs
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Electric Motors: Manufacture brand VEM Motors GmbH, Operational
Emissions Status: US EPA Label
Emission Certification Label: US EPA certification label
Blow by @ idle (subjective visual observation): Minor
Starter: Operational
Limited Function Check (Engine): The engine started and ran.
Power Travel Drive System: Travels properly
Limited Function Check: The hydraulic system was operational.
Feed Hopper: Length @ top: 11’, Width @ top: 8’ 6”, Side boards added
Feed Conveyor Drive Motor: Operational
Discharge Conveyor Drive Motor: Operational
Limited Function Check: The main chassis components functioned when checked without a load.
Stabilizer Jacks: Number of jacks 2, Hydraulic, The stabilizers are operational
Left Grouser Height: 25 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 25 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Apr 15, 2026
Silicon: 0 PPM
Tin: 1.99 PPM
Silver: 0.01 PPM
Aluminum: 0.76 PPM
Chromium: 0 PPM
Lead: 1.6 PPM
Copper: 2.23 PPM
Nickel: 0.02 PPM
Iron: 2.1 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 79003
Hour Meter / Odometer: 6750 hrs
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Electric Motors: Manufacture brand VEM Motors GmbH, Operational
Emissions Status: US EPA Label
Emission Certification Label: US EPA certification label
Blow by @ idle (subjective visual observation): Minor
Starter: Operational
Limited Function Check (Engine): The engine started and ran.
Power Travel Drive System: Travels properly
Limited Function Check: The hydraulic system was operational.
Feed Hopper: Length @ top: 11’, Width @ top: 8’ 6”, Side boards added
Feed Conveyor Drive Motor: Operational
Discharge Conveyor Drive Motor: Operational
Limited Function Check: The main chassis components functioned when checked without a load.
Stabilizer Jacks: Number of jacks 2, Hydraulic, The stabilizers are operational
Left Grouser Height: 25 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 25 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Apr 15, 2026
Silicon: 0 PPM
Tin: 1.99 PPM
Silver: 0.01 PPM
Aluminum: 0.76 PPM
Chromium: 0 PPM
Lead: 1.6 PPM
Copper: 2.23 PPM
Nickel: 0.02 PPM
Iron: 2.1 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 79003
Hour Meter / Odometer: 6750 hrs
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Electric Motors: Manufacture brand VEM Motors GmbH, Operational
Emissions Status: US EPA Label
Emission Certification Label: US EPA certification label
Blow by @ idle (subjective visual observation): Minor
Starter: Operational
Limited Function Check (Engine): The engine started and ran.
Power Travel Drive System: Travels properly
Limited Function Check: The hydraulic system was operational.
Feed Hopper: Length @ top: 11’, Width @ top: 8’ 6”, Side boards added
Feed Conveyor Drive Motor: Operational
Discharge Conveyor Drive Motor: Operational
Limited Function Check: The main chassis components functioned when checked without a load.
Stabilizer Jacks: Number of jacks 2, Hydraulic, The stabilizers are operational
Left Grouser Height: 25 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 25 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Apr 15, 2026
Silicon: 0 PPM
Tin: 1.99 PPM
Silver: 0.01 PPM
Aluminum: 0.76 PPM
Chromium: 0 PPM
Lead: 1.6 PPM
Copper: 2.23 PPM
Nickel: 0.02 PPM
Iron: 2.1 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 79003
Hour Meter / Odometer: 6750 hrs
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Electric Motors: Manufacture brand VEM Motors GmbH, Operational
Emissions Status: US EPA Label
Emission Certification Label: US EPA certification label
Blow by @ idle (subjective visual observation): Minor
Starter: Operational
Limited Function Check (Engine): The engine started and ran.
Power Travel Drive System: Travels properly
Limited Function Check: The hydraulic system was operational.
Feed Hopper: Length @ top: 11’, Width @ top: 8’ 6”, Side boards added
Feed Conveyor Drive Motor: Operational
Discharge Conveyor Drive Motor: Operational
Limited Function Check: The main chassis components functioned when checked without a load.
Stabilizer Jacks: Number of jacks 2, Hydraulic, The stabilizers are operational
Left Grouser Height: 25 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 25 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Apr 15, 2026
Silicon: 0 PPM
Tin: 1.99 PPM
Silver: 0.01 PPM
Aluminum: 0.76 PPM
Chromium: 0 PPM
Lead: 1.6 PPM
Copper: 2.23 PPM
Nickel: 0.02 PPM
Iron: 2.1 PPM
Glycol: NEG
Water: NEG
Fuel: <5%

Digital Glovebox

For your convenience, we've included these documents free to download so you can make the best decision.

Close-up detailed photos

Inspection Report

VIEW

Listings may picture specialty attachments not included in the sale. If you have questions about machine configuration, contact our sales team.

Heavy Machinery, Happy Customers

Hear what customers are saying about Boom & Bucket.

I sent the video to my mechanic and he said go for it.Lee H - California5/5Everything went well.John L - New Mexico5/5I'm not your biggest client, but I was treated like I was.Ed K - Texas5/5I was really impressed with the pictures.Bobby P - Georgia5/5It was almost too good to be true.Cleveland J - Texas5/5