IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2018 Powerscreen Trakpactor 320SR Closed Circuit Impact Crusher Plant The last reported number of hours was 9325. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Scalia 5 Cylinder Diesel Engine
Vibratory Grizzly Feeder w/Hydraulic Fold Hopper Wings
Powerscreen 32 in Impact Crusher
335 hp Drive Motor
Powerscreen 132 in x 60 in Double Deck Screen
Spray/Wash System
38 in Wide Feed Conveyor
38 mm Wide Fines Discharge Conveyor
42 in Wide Under Crusher Conveyor
27 in x 6 ft 6 in Crusher to Screen Conveyor
45 in Wide Under Screen Conveyor
35 in Wide Left Discharge Conveyor
35 in Wide Right Discharge Conveyor
55 in Wide End Discharge Conveyor
21 in x 3 ft 6 in Cross Belt Magnet
Cable Remote Control
16 in Triple Grouser Track Shoes
Serial Number / VIN: PID320SRCOM146792
Hour Meter / Odometer: 9325 hrs
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Emissions Status: No US EPA Label Present
Emission Certification Label: None found
Blow by @ idle (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check (Engine): The engine started and ran.
Conveyor Cylinders: Dripping leak
Power Travel Drive System: Boggs when steering
Limited Function Check: The hydraulic system was operational.
Feed Hopper: Length @ top: 9 ft, Width @ top: 8.6, Side boards added
Crusher Roll Condition: Roll dia. and width 43 in x 32 in
Feed Conveyor Condition: 40 in wide feed belt
Discharge Conveyor Drive Motor: Operational
Left Grouser Height: 24 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 24 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
$150,000
$1,600
18675 hours
$3,632
476 hours
$3,689
$4,288
3 hours
$2,389
1 hours
$4,109
706 hours
$8,628
View more
$150,000
$1,600
18675 hours
$3,632
476 hours
$3,689
$4,288
3 hours
$2,389
1 hours
$4,109
706 hours
$8,628
View more