No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2019 Bobcat E50 Mini Excavator The last reported number of hours was 3378. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Control Pattern Changer
2019 US EPA Label
Swing Boom
5 ft Stick
Auxiliary Hydraulic Plumbing
Backfill Blade
16 in Rubber Tracks
Hydraulic Quick Coupler
24 in Digging Bucket
Hydraulic Thumb
Serial Number / VIN: AJ1816227
Hour Meter / Odometer: 3378 hrs
Sheet Metal (fiberglass) Condition: Damaged right rear side panel
Exterior Lights: Operational
Travel Alarm: Inoperable
Horn: Inoperable
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Swing Brake: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Drivetrain Controls: High speed does not engage
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2019 US EPA Label
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: Oil Pan
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Left Drive Motor: Covered
Right Drive Motor: Covered
Limited Function Check: The drivetrain was operational., High speed does not engage.
Auxiliary Hydraulic Plumbing: Operational, End of boom
Swing Motor: Covered
Hydraulic Center Swivel: Covered
Boom Lift Cylinder(s): Heavy pin and bushing movement
Stick Cylinder: Seepage
Thumb Cylinder: Seepage
Blade Lift Cylinder: Seepage
Limited Function Check: The hydraulic system was operational.
Swing Tower Pivot: Heavy movement
Boom Base Pin and Bushings: Heavy movement
Pin and Bushings Boom to Stick: Heavy movement
Pins and Bushings Stick to Coupler: Heavy movement
Limited Function Check: The main components were operational in a limited check.
Left Rubber Belt Drive Lugs: No visible damage
Left Grouser Height: 22 mm
Right Rubber Belt Drive Lugs: No visible damage
Right Grouser Height: 23 mm
Quick Coupler: Operational
Blade Condition: Bent metal at top. Welded repair on blade frame
Thumb: Hydraulic thumb
date of analysis: Mar 18, 2026
Silicon: 0.04 PPM
Tin: 0.01 PPM
Silver: 0 PPM
Aluminum: 2.21 PPM
Chromium: 1.24 PPM
Lead: 0 PPM
Copper: 1.57 PPM
Nickel: 0.33 PPM
Iron: 18.57 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
2482 hours
$29,100
3596 hours
$26,950
3052 hours
$29,100
3008 hours
$29,100
2765 hours
$29,100
3007 hours
$27,600
1315 hours
$69,900
1537 hours / 35 miles
$35,320
View more
2482 hours
$29,100
3596 hours
$26,950
3052 hours
$29,100
3008 hours
$29,100
2765 hours
$29,100
3007 hours
$27,600
1315 hours
$69,900
1537 hours / 35 miles
$35,320
View more