IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2019 Cat 289D Two-Speed Compact Track Loader The last reported number of hours was 6325. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Joystick Steering
Self Leveling
Tier 4
2019 US EPA Label
17.5 in Track Belts
Hydraulic Coupler
80 in Bucket
Engine Power: 74.3 hp
Displacement: 203.2 cu in
Operating Weight: 10776 lb
Fuel Capacity: 27.7 gal
Rated Operating Capacity: 3800 lb
Tipping Load: 7600 lb
Bucket Breakout Force: 7288 lbf
Hydraulic Flow - Standard: 23 gal/min
Hydraulic Pressure: 3335 psi
Track Width: 15.7 in
Length of Track on Ground: 59 in
Ground Pressure: 4.9 psi
Max Travel Speed: 5.6 mph
Width over tracks: 78 in
Height to Top of Cab: 83.1 in
Serial Number / VIN: CAT0289DLTAW14082
Hour Meter / Odometer: 6325 hrs
Glass: The front door seal is loose and the glass has scratches
Exterior Lights: Some not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2019 US EPA Label
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: Front of engine and valve cover
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Auxiliary Hydraulic Plumbing: Wet with residue, seepage. Not operationally checked
Limited Function Check: The hydraulic system was operational.
Chassis to Arm Pins: Heavy movement
Quick Coupler to Arms Pins: Heavy movement
Limited Function Check: The main chassis components were operational in a limited check.
Grouser Height Measurement : Left side: 10 mm, Right side: 9 mm
Rubber Belt Drive Lugs: Worn
Track Tensioners: Operational
Quick Coupler: Not operationally checked
Loader Bucket Cutting Edge/Shanks/Teeth: Reversible-not turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
2541 hours
$34,900
1234 hours
$36,900
1760 hours
$40,950
14 hours
$39,000
2795 hours
$36,000
5055 hours
$29,900
2728 hours
$35,000
1186 hours
$40,000
View more
2541 hours
$34,900
1234 hours
$36,900
1760 hours
$40,950
14 hours
$39,000
2795 hours
$36,000
5055 hours
$29,900
2728 hours
$35,000
1186 hours
$40,000
View more