IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2019 John Deere 333G Two-Speed Compact Track Loader The last reported number of hours was 2071. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Creep Mode
Joystick Steering
Rear View Camera
Requires Diesel Exhaust Fluid
17.5 in Track Belts
Manual Quick Coupler
90 in Bucket
Engine Power: 100 hp
Displacement: 207.5 cu in
Rated Operating Capacity: 3700 lb
Tipping Load: 7400 lb
Bucket Breakout Force: 13000 lb
Lift Height: 128 in
Track Width: 17.7 in
Machine Width: 78 in
Machine Length: 144 in
Operating Weight: 12100 lb
Fuel Capacity: 29.7 gal
Hydraulic Flow: 36 gpm
Ground Pressure: 4.5 psi
Travel Speed: 8 mph
Serial Number / VIN: 1T0333GMVKF356059
Hour Meter / Odometer: 2071 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Auxiliary Hydraulic Control: Not operationally checked
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational; Active codes displayed light stays on
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational. Active codes displayed
Auxiliary Hydraulic Plumbing: Not operationally checked
Bucket Tilt Cylinders: Heavy pin and bushing movement
Limited Function Check: The hydraulic system was operational.
Limited Function Check: The main chassis components were operational in a limited check.
Grouser Height Measurement : Left side: 5 mm, Right side: 5 mm
Rubber Belt Drive Lugs: No visible damage
Track Tensioners: No visible damage
Quick Coupler: Operational
Loader Bucket Cutting Edge/Shanks/Teeth: Reversible-turned/Broken
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
2600 hours
$45,000
2077 hours
$43,000
2170 hours
$43,000
2012 hours
$48,000
3392 hours
$37,000
3497 hours
$35,000
4159 hours
$34,000
3556 hours
$32,000
View more
2600 hours
$45,000
2077 hours
$43,000
2170 hours
$43,000
2012 hours
$48,000
3392 hours
$37,000
3497 hours
$35,000
4159 hours
$34,000
3556 hours
$32,000
View more