No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2020 Bomag BW206AD-5 Double Drum Roller The last reported number of hours was 992. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Open Operator Station
Swivel Operator Controls
2019 US EPA Label
Deutz TCD4.1 L4 105 kW 4.03 L Diesel Engine
Requires Diesel Exhaust Fluid
84 in Compaction Width
Water System
Edge Cutter
Engine Power: 131 hp
Displacement: 276 cu in
Operating Weight: 25,353 lbs
Drum Width: 83.9 inches
Fuel Capacity: 66 gal
Max Speed: 7.5 mph
Vibration Frequency 1: 30 Hz
Amplitude High: 0.067 inches
Centrifugal Force per Drum: 50,706 lbs
Serial Number / VIN: 101921811004
Hour Meter / Odometer: 992 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational, Low coolant light stays on
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Emissions Status: 2019 US EPA Label
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check - Compaction: The drivetrain was operational without a load.
Drum Vibration Motors: Front drum inoperable Rear Drum inoperable
Limited Function Check: The hydraulic system was operational.
Water System: Unable to test
Ballast Tank: No additional weight visible
Limited Function Check (roller): The main chassis components were operational.
date of analysis: Mar 16, 2026
Silicon: 0.48 PPM
Tin: 0.59 PPM
Silver: 0 PPM
Aluminum: 0.26 PPM
Chromium: 0.05 PPM
Lead: 0.78 PPM
Copper: 0.42 PPM
Nickel: 0.31 PPM
Iron: 6.73 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597