Powerhouse Protection
Our buyer guarantee protects your purchase against anything missed during inspection.
Price excludes taxes, fees, and shipping
Our buyer guarantee protects your purchase against anything missed during inspection.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
This 2020 John Deere 35G Excavators - Mini is available on Boom & Bucket. The last reported number of hours was 2211. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading. All units with remaining factory warranties are transferable and will be transferred to the new owner at the time of sale.
Zero-tail-swing configuration
ROPS/FOPS canopy
Standard backfill blade
Mechanical quick coupler
Boom-mounted auxiliary hydraulic lines with quick coupler
Hydraulic pilot controls
Excavator-to-backhoe control pattern selector
Electronic throttle control with auto-idle
Multifunction monitor system
Foldable propel pedals and levers
Two travel modes with automatic shifting
Motion alarm with cancel switch
Engine Manufacturer And Model: Yanmar 3TNV88F
Engine Displacement: 100.2 cu. in.
Net Engine Power: 23.3 hp at 2,400 rpm
Emissions Standard: EPA Final Tier 4 / EU Stage IV
Operating Weight: 7,760 lb with standard arm, standard counterweight, rubber tracks, full fuel tank, and 175 lb operator
Maximum Travel Speed: 2.7 mph high / 1.7 mph low
Pump Flow: Two piston pumps at 10.1 gpm each and one gear pump at 6.0 gpm
Auxiliary Hydraulic Flow: 16.2 gpm
Hydraulic System Type: Open center with two variable-displacement pumps and one fixed-gear pump
Rubber Track Width: 12 in.
Ground Pressure: 4.6 psi with canopy, standard arm, standard counterweight, and rubber tracks
Swing Speed: 9.0 rpm
Fuel Tank Capacity: 11.1 gal.
Hydraulic Tank Capacity: 8.5 gal.
Engine Oil Capacity With Filter: 7.6 qt.
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
1037 hours
$14,938 USD
1537 hours / 35 miles
$35,320 USD
961 hours / 21 miles
$33,241 USD
1672 hours / 67 miles
$53,785 USD
1431 hours / 61 miles
$62,282 USD
4574 hours / 39 miles
$70,716 USD
760 hours / 71 miles
$31,327 USD
1185 hours / 51 miles
$37,104 USD
1037 hours
$14,938 USD
1537 hours / 35 miles
$35,320 USD
961 hours / 21 miles
$33,241 USD
1672 hours / 67 miles
$53,785 USD
1431 hours / 61 miles
$62,282 USD
4574 hours / 39 miles
$70,716 USD
760 hours / 71 miles
$31,327 USD
1185 hours / 51 miles
$37,104 USD