No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Price excludes taxes, fees, and shipping
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2020 John Deere 650K XLT Crawler Dozer The last reported number of hours was 1062. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Requires Diesel Exhaust Fluid
115 in Wide PAT Blade
19.5 in Single Grouser Track Shoes
Engine Power: 104 kW (131 hp)
Displacement: 276 cu in
Operating Weight: 20,624 lbs
Fuel Capacity: 65 gal
Track Width: 20 in
Blade Width: 128 in
Blade Capacity: 2.9 cu yd
Ground Pressure: 5.9 psi
Maximum Forward Speed: 5.5 mph
Maximum Reverse Speed: 6.2 mph
Hydraulic System Fluid Capacity: 15.9 gal
Dimensions (LxWxH): 186x128x108 in
Serial Number / VIN: 1T0650KKHLF383182
CE Mark: No CE mark found
Hour Meter / Odometer: 1062 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Inoperable
Safety Lock Out/Stop: Operational
Current Safety Manual: Yes
Current Operator/Maintenance Manual: Yes
Engine Oil Pressure: The gauge registers in the operating range.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 42 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 42 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
6967 hours
$119,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
3938 hours
$150,000
13049 hours
$90,000
13004 hours
$105,000
19565 hours
$200,000
5867 hours
$105,000
View more
6967 hours
$119,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
3938 hours
$150,000
13049 hours
$90,000
13004 hours
$105,000
19565 hours
$200,000
5867 hours
$105,000
View more