No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2021 Case CX210D Tracked Excavator The last reported number of hours was 751. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Air Conditioner
Straight Travel Pedal
Control Pattern Changer
Rear View Camera
2021 US EPA Label
Requires Diesel Exhaust Fluid
9 ft 8 in Stick
Auxiliary Hydraulic Plumbing
31.5 in Triple Grouser Track Shoes
Hydraulic Quick Coupler
48 in Digging Bucket
Serial Number / VIN: DAC210K7NMS7H2642
Hour Meter / Odometer: 751 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Mirrors: Missing left mirror glass
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted.
Engine: 2021 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Auxiliary Hydraulic Plumbing: Operational, End of stick
Limited Function Check: The hydraulic system was operational.
Limited Function Check: The main components were operational in a limited check.
Left Grouser Height: 25 mm
Right Grouser Height: 25 mm
Cutting Edge / Teeth / Adapters: Missing (1) tooth
Quick Coupler: Not operationally checked
Thumb: Hydraulic thumb, Heavy movement in connecting pin, inside shanks cut off with torch
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
2616 hours
$121,900
3509 hours
$39,900
5201 hours
$184,950
5170 hours
$225,000
2212 hours
$86,500
5641 hours
$160,100
1079 hours
$111,000
5830 hours
$233,950
View more
2616 hours
$121,900
3509 hours
$39,900
5201 hours
$184,950
5170 hours
$225,000
2212 hours
$86,500
5641 hours
$160,100
1079 hours
$111,000
5830 hours
$233,950
View more