IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2021 Cat 249D3 Two-Speed Compact Track Loader The last reported number of hours was 923. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Open Operator Station
Joystick Steering
Rear View Camera
Tier 4
2020 US EPA Label
12.2 in Track Belts
Manual Quick Coupler
67 in Bucket
Engine Power: 67.1 hp
Displacement: 203.6 cu in
Operating Weight: 7825 lb
Fuel Capacity: 27.7 gal
Rated Operating Capacity: 2225 lb
Tipping Load: 4450 lb
Track Width: 15.7 in
Ground Pressure: 4.9 psi
Max Travel Speed: 5.1 mph
Hydraulic Flow: 20 gal/min
Hydraulic Pressure: 3335 psi
Width Over Tracks: 66 in
Height to Bucket Hinge Pin: 115.6 in
Length With Bucket on Ground: 136.3 in
Serial Number / VIN: CAT0249DPWS500517
Hour Meter / Odometer: 923 hrs
Exterior Lights: One lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: Yes
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator remains on after engine is started. Oil pressure sensor low on screen
Warning Lights: Operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2020 US EPA Label
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Auxiliary Hydraulic Plumbing: Not operationally checked, Electrical Connector damaged
Limited Function Check: The hydraulic system was operational.
Limited Function Check: The main chassis components were operational in a limited check.
Grouser Height Measurement : Left side: 18 mm, Right side: 17 mm
Rubber Belt Drive Lugs: Wear
Track Tensioners: Operational
Quick Coupler: Operational
Loader Bucket Cutting Edge/Shanks/Teeth: Reversible-not turned
For your convenience, we've included these documents free to download so you can make the best decision.
2351 hours / 3371 miles
$64,147
2365 hours / 2228 miles
$51,380
3169 hours / 1746 miles
$43,345
2753 hours
$36,000
2285 hours / 3311 miles
$64,147
3269 hours / 3540 miles
$55,666
6905 hours / 4624 miles
$57,062
5885 hours / 3807 miles
$59,196
View more
2351 hours / 3371 miles
$64,147
2365 hours / 2228 miles
$51,380
3169 hours / 1746 miles
$43,345
2753 hours
$36,000
2285 hours / 3311 miles
$64,147
3269 hours / 3540 miles
$55,666
6905 hours / 4624 miles
$57,062
5885 hours / 3807 miles
$59,196
View more