IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2021 John Deere 333G Two-Speed Compact Track Loader The last reported number of hours was 2389. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Creep Mode
Joystick Steering
Rear View Camera
17.5 in Track Belts
7 Pin Electric Kit
Electric Coupler
68 in Bucket
Engine Power: 100 hp
Operating Weight: 12,100 lbs
Rated Operating Capacity: 3,700 lbs
Tipping Load: 10,570 lbs
Bucket Breakout Force: 9,315 lbs
Track Width: 17.7 in
Fuel Capacity: 30.0 gal
Hydraulic Pump Flow: 25 gpm
Max Travel Speed: 7.8 mph
Displacement: 276 cu in
Serial Number / VIN: 1T0333GMAMF400677
Hour Meter / Odometer: 2389 hrs
Sheet Metal (fiberglass) Condition: Bent metal in areas
Glass: Top window leaks
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: Yes
Current Operator/Maintenance Manual: Yes
Auxiliary Hydraulic Control: Not operationally checked
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Auxiliary Hydraulic Plumbing: Not operationally checked
Bucket Tilt Cylinders: Heavy pin and bushing movement
Limited Function Check: The hydraulic system was operational.
Limited Function Check: The main chassis components were operational in a limited check.
Grouser Height Measurement : Left side: 20 mm, Right side: 20 mm
Rubber Belt Drive Lugs: No visible damage
Track Tensioners: No visible damage
Quick Coupler: Operational
Loader Bucket Condition: Hole rusted in bucket
Loader Bucket Cutting Edge/Shanks/Teeth: Reversible-not turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
2600 hours
$45,000
2077 hours
$43,000
2170 hours
$43,000
2012 hours
$48,000
3392 hours
$37,000
3497 hours
$35,000
4159 hours
$34,000
3556 hours
$32,000
View more
2600 hours
$45,000
2077 hours
$43,000
2170 hours
$43,000
2012 hours
$48,000
3392 hours
$37,000
3497 hours
$35,000
4159 hours
$34,000
3556 hours
$32,000
View more