IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2021 John Deere 850L WLT Crawler Dozer The last reported number of hours was 10021. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Rear View Camera
Pre-Wired for Grade Control
Requires Diesel Exhaust Fluid
158 in Wide PAT Blade
2 Cylinder Multi-Shank Ripper
29.5 in Single Grouser Track Shoes
Engine Power: 225 hp
Displacement: 415 cu in
Operating Weight: 42,463 lbs
Fuel Capacity: 109 gal
Blade Width: 156 in
Blade Capacity: 4.6 cu yd
Track Width: 22 in
Maximum Forward Speed: 6.4 mph
Maximum Reverse Speed: 8.4 mph
Ground Pressure: 7.3 psi
Serial Number / VIN: 1T0850LXTMF409885
Hour Meter / Odometer: 10021 hrs
Exterior Lights: Some not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: Yes
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Low coolant light stays on
Gauges: Operational
Air Conditioner: Operational
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Auxiliary Hydraulic Plumbing: Operational, Rear
Blade Angle Cylinders: Dripping leak on the right cylinder
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 62 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 62 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
6967 hours
$119,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
3938 hours
$150,000
13049 hours
$90,000
13004 hours
$105,000
19565 hours
$200,000
5867 hours
$105,000
View more
6967 hours
$119,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
3938 hours
$150,000
13049 hours
$90,000
13004 hours
$105,000
19565 hours
$200,000
5867 hours
$105,000
View more