IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2021 Komatsu D71PX-24 Crawler Dozer The last reported number of hours was 5259. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Rear View Camera
2021 US EPA Label
Requires Diesel Exhaust Fluid
169 in Wide PAT Blade
36 in Single Grouser Track Shoes
Engine Power: 237 hp
Operating Weight: 50,485 lbs
Fuel Capacity: 108.3 gallons
Blade Capacity: 5.2 yd³
Displacement: 408 cu in
Track Width: 36 inches
Length w/o Blade: 15 ft
Width Over Tracks: 9.5 ft
Height to Top of Cab: 10.2 ft
Ground Clearance: 17.7 inches
Transmission Type: Hydrostatic
Serial Number / VIN: KMT0D137LMA070204
Hour Meter / Odometer: 5259 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The gauge registers in the operating range.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Inoperable
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted.
Engine: 2021 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: Compressor will not engage
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 55 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 56 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Jul 27, 2026
Silicon: 0.34 PPM
Tin: 1.5 PPM
Silver: 0.17 PPM
Aluminum: 24.83 PPM
Chromium: 2.71 PPM
Lead: 0.52 PPM
Copper: 3.05 PPM
Nickel: 0.9 PPM
Iron: 62.89 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Silicon: 4.74 PPM
Silver: 0 PPM
Aluminum: 1.98 PPM
Chromium: 0.2 PPM
Lead: 3.75 PPM
Copper: 13.06 PPM
Nickel: 0.23 PPM
Iron: 8.37 PPM
Glycol: N/A
Water: N/A
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
6967 hours
$119,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
3938 hours
$150,000
13049 hours
$90,000
13004 hours
$105,000
19565 hours
$200,000
5867 hours
$105,000
View more
6967 hours
$119,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
3938 hours
$150,000
13049 hours
$90,000
13004 hours
$105,000
19565 hours
$200,000
5867 hours
$105,000
View more