No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2022 Komatsu D71PXI-24 Crawler Dozer The last reported number of hours was 8693. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Rear View Camera
Pre-Wired for Grade Control
Requires Diesel Exhaust Fluid
158 in Wide PAT Blade
2 Cylinder Multi-Shank Ripper
30 in Single Grouser Track Shoes
Engine Power: 237 hp
Operating Weight: 50,927 lbs
Fuel Capacity: 108.3 gal
Blade Capacity: 5.2 yd³
Blade Width: 11.9 ft
Track Width: 34 in
Max Speed - Forward: 5.6 mph
Max Speed - Reverse: 5.6 mph
Ground Pressure: 5.69 psi
Displacement: 409 cu in
Number of Cylinders: 6
Transmission Type: Hydrostatic
Hydraulic System Fluid Capacity: 20.6 gal
Final Drives Fluid Capacity: 3.4 gal
Length with Blade: 18.8 ft
Serial Number / VIN: KMT0D137HMA070477
CE Mark: No CE mark found
Hour Meter / Odometer: 8693 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Auxiliary Hydraulic Plumbing: Operational, Rear
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 59 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 58 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Apr 17, 2026
Silicon: 0 PPM
Tin: 1.07 PPM
Silver: 0.08 PPM
Aluminum: 0.88 PPM
Chromium: 0.75 PPM
Lead: 0.89 PPM
Copper: 1.37 PPM
Nickel: 0.64 PPM
Iron: 22.2 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: KMT0D137HMA070477
CE Mark: No CE mark found
Hour Meter / Odometer: 8693 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Auxiliary Hydraulic Plumbing: Operational, Rear
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 59 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 58 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Apr 17, 2026
Silicon: 0 PPM
Tin: 1.07 PPM
Silver: 0.08 PPM
Aluminum: 0.88 PPM
Chromium: 0.75 PPM
Lead: 0.89 PPM
Copper: 1.37 PPM
Nickel: 0.64 PPM
Iron: 22.2 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: KMT0D137HMA070477
CE Mark: No CE mark found
Hour Meter / Odometer: 8693 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Auxiliary Hydraulic Plumbing: Operational, Rear
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 59 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 58 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Apr 17, 2026
Silicon: 0 PPM
Tin: 1.07 PPM
Silver: 0.08 PPM
Aluminum: 0.88 PPM
Chromium: 0.75 PPM
Lead: 0.89 PPM
Copper: 1.37 PPM
Nickel: 0.64 PPM
Iron: 22.2 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
7152 hours
$675,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
8988 hours
$150,000
777 hours
$397,000
1782 hours
$45,000
1394 hours
$213,000
4361 hours
$215,000
View more
7152 hours
$675,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
8988 hours
$150,000
777 hours
$397,000
1782 hours
$45,000
1394 hours
$213,000
4361 hours
$215,000
View more