IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2022 Komatsu PC490LCI-11 Tracked Excavator The last reported number of hours was 6196. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Air Conditioner
Control Pattern Changer
Rear View Camera
Pre-Wired for Grade Control
2022 US EPA Label
Requires Diesel Exhaust Fluid
11 ft 3 in Stick
35.5 in Triple Grouser Track Shoes
61 in Digging Bucket
Engine Power: 362 hp
Operating Weight: 105,670 lbs
Bucket Capacity: 3.8 cu yd
Maximum Digging Depth: 26 ft 10 in
Engine Model: Komatsu SAA6D125E-7
Displacement: 674 cu in
Fuel Capacity: 192.5 gal
Hydraulic System Fluid Capacity: 108.3 gal
Track Width: 36 in
Emissions Level: Tier 4 Final
Serial Number / VIN: KMTPC251LNWA45360
Hour Meter / Odometer: 6196 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Swing Brake: Operational
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2022 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Dripping leak
Limited Function Check: The hydraulic system was operational.
Stick Condition: Face is bent. See additional photos.
Limited Function Check: The main components were operational in a limited check.
Left Grouser Height: 35 mm
Left Track Pins and Bushings: Bushings show heavy wear.
Right Grouser Height: 35 mm
Right Track Pins and Bushings: Bushings show heavy wear.
Cutting Edge / Teeth / Adapters: New teeth
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
4315 hours
$199,500
3532 hours
$283,500
2032 hours
$183,750
4307 hours
$173,250
3689 hours
$183,750
5160 hours
$210,000
1874 hours
$362,250
1337 hours
$351,750
View more
4315 hours
$199,500
3532 hours
$283,500
2032 hours
$183,750
4307 hours
$173,250
3689 hours
$183,750
5160 hours
$210,000
1874 hours
$362,250
1337 hours
$351,750
View more