IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2023 Cat 308E2 CR Tracked Excavator The last reported number of hours was 217. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Air Conditioner
Tier 4
2015 US EPA Label
5 ft 5 in Stick
Auxiliary Hydraulic Plumbing
Backfill Blade
17.75 in Triple Grouser Track Shoes
Hydraulic Quick Coupler
32 in Digging Bucket
Hydraulic Thumb
Serial Number / VIN: CAT00308TGX803793
CE Mark: CE Marked
Hour Meter / Odometer: 217 hrs
Exterior Lights: Operational
Horn: Inoperable
Seat Belts: Operational
Safety Lock Out/Stop: Operational Lock out intermittently does not activate controls
Swing Brake: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2015 US EPA Label
A/C Compressor: Operational
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.
Limited Function Check: The drivetrain was operational.
Hoses (Hydraulics): One hose appears burnt
Auxiliary Hydraulic Plumbing: Operational, End of stick
Limited Function Check: The hydraulic system was operational.
Bottom Covers: Missing.
Limited Function Check: The main components were operational in a limited check.
Left Grouser Height: 19 mm
Right Grouser Height: 19 mm
Quick Coupler: Not operationally checked, Plate bolted over pin grabber, Could not operationally check
Blade Condition: Weld repair
Blade Cutting Edge Condition: Reversible-Not turned, Edges worn
Thumb: Hydraulic thumb
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
286 hours
$81,950
5936 hours
$125,500
363 hours
$38,500
920 hours
$194,000
4518 hours
$165,000
2756 hours / 19 miles
$154,354
4583 hours / 274 miles
$130,536
3919 hours / 121 miles
$138,937
View more
286 hours
$81,950
5936 hours
$125,500
363 hours
$38,500
920 hours
$194,000
4518 hours
$165,000
2756 hours / 19 miles
$154,354
4583 hours / 274 miles
$130,536
3919 hours / 121 miles
$138,937
View more