No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2023 John Deere 700L LGP Crawler Dozer The last reported number of hours was 1140. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Rear View Camera
2023 US EPA Label
Requires Diesel Exhaust Fluid
132 in Wide PAT Blade
Counterweight
24 in Single Grouser Track Shoes
Engine Power: 131 hp
Displacement: 276 cu in
Operating Weight: 23600 lb
Fuel Capacity: 65 gal
Blade Width: 144 in
Blade Capacity: 3.8 cu yd
Ground Pressure: 5.2 psi
Max Speed - Forward: 6 mph
Max Speed - Reverse: 6 mph
Track Width: 30 in
Serial Number / VIN: 1T0700LXTPF442108
CE Mark: No CE mark found
Hour Meter / Odometer: 1140 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The gauge registers in the operating range.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: The ambient temperature is too cold to check
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2023 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Push Arm Pivot/C-FrameTrunnions: Shims remaining
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 51 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 51 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Mar 25, 2026
Silicon: 0.61 PPM
Tin: 5.67 PPM
Silver: 0 PPM
Aluminum: 1.85 PPM
Chromium: 0 PPM
Lead: 1.07 PPM
Copper: 104.11 PPM
Nickel: 0.41 PPM
Iron: 5.45 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
date of analysis: Mar 25, 2026
Silicon: 2.58 PPM
Tin: 0.31 PPM
Silver: 0 PPM
Aluminum: 0.74 PPM
Chromium: 0.62 PPM
Lead: 1.44 PPM
Copper: 9.04 PPM
Nickel: 0.53 PPM
Iron: 10.46 PPM
Glycol: N/A
Water: N/A
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
5088 hours
$70,000
3034 hours
$150,400
5504 hours
$225,000
8019 hours
$151,500
9668 hours
$171,000
10285 hours
$189,000
5993 miles
$165,600
1063 hours / 228 miles
$104,742
View more
5088 hours
$70,000
3034 hours
$150,400
5504 hours
$225,000
8019 hours
$151,500
9668 hours
$171,000
10285 hours
$189,000
5993 miles
$165,600
1063 hours / 228 miles
$104,742
View more