No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2023 (unverified) Morbark Wood Hog 6400XT Tracked Horizontal Grinder The last reported number of hours was 1097. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
2023 US EPA Label
Cat C32 V-12 1200 hp 32.1 L Diesel Engine
60 in Feeder
60 in Rotor
40 in Discharge Conveyor
Serial Number / VIN: 195-1120, Verified by frame stamp, cannot locate manufacturer plate.
Hour Meter / Odometer: 1097 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Missing switch for gate operation
Oil Pressure: The gauge registers in the operating range.
Warning Lights: Operational; Yoke position low error and fuel level low error lights stays on
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Emissions Status: 2023 US EPA Label
Blow-by (subjective visual observation): Significant
Starter: Operational
Oil Leaks: Exhaust system
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran. Damaged fuel tank fill tube and cap
Limited Function Check: The drivetrain was operational.
Feed Table: 14 ft long x 5 ft wide feed table, Cracked weld. Worn feeder chains. Loose bolts on the two cover plates on the front.
Discharge Conveyor Condition: Damaged discharge conveyor on left side of the machine, damaged bearing on bottom conveyor
Pumps (Hydraulics): Dripping leak
Hydraulic Tank: Dripping leak; Secondary hydraulic tank dripping leak.
Limited Function Check: The hydraulic system was operational.
Track Tensioners: No visible damage
Grouser Height: Left Side: 41 mm, Right Side: 41 mm
Pins and Bushings Turned?: No
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
4475 hours
$450,000
3526 hours
$177,000
$115,000
2408 hours
$615,000
5055 hours
$700,000
2202 hours
$600,000
1895 hours
$640,000
10244 hours
$350,000
View more
4475 hours
$450,000
3526 hours
$177,000
$115,000
2408 hours
$615,000
5055 hours
$700,000
2202 hours
$600,000
1895 hours
$640,000
10244 hours
$350,000
View more