No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Price excludes taxes, fees, and shipping
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
1989 Case 855D Crawler Loader The last reported number of hours was 7171. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Open Operator Station
Sweeps
Auxiliary Hydraulics
79 in Multi-Purpose Bucket
Counterweight
14.75 in Double Grouser Track Shoes
Engine Power: 131 hp
Displacement: 276 cu in
Operating Weight: 17857 lbs
Fuel Capacity: 42 gal
Max Speed - forward: 6.2 mph
Max Speed - reverse: 6.2 mph
Track Width: 17.7 in
Bucket Capacity: 1.5 cu yd
Bucket Width: 88 in
Hydraulic Pump Flow: 28.5 gal/min
Serial Number / VIN: JAK0005726
CE Mark: No CE mark found
Hour Meter / Odometer: 7171 hrs
Exterior Lights: Some not operational, Left rear lights are not operational
Travel Alarm: Missing
Horn: Missing
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
3rd Valve: Equipped with a 3rd valve and plumbing for an auxiliary attachment.
Oil Pressure: The gauge registers in the operating range.
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: US EPA Label not legible
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Auxiliary Hydraulic Plumbing: Operational, Front
Loader Lift Cylinders: Dripping leak on the left cylinder, Dripping leak on the right cylinder, Heavy pin and bushing movement
Bucket Tilt Cylinders: Heavy pin and bushing movement
Multi Purpose Bucket Cylinders: Heavy pin and bushing movement
Limited Function Check: The hydraulic system was operational.
Chassis to Arm Pins: Movement
Tilt Linkage Pins and Bushings: Heavy movement
Bucket to Arm Pins: Movement
Limited Function Check: The main components were operational except as noted.
Loader Bucket Condition: Cracks and weld repairs
Loader Bucket Cutting Edge: Heavy wear
Left Track Pads: Bent with significant wear
Left Grouser Height: 9 mm
Left Track Links: Significant wear
Right Grouser Height: 8 mm
Right Track Links: Significant wear
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
2351 hours / 3371 miles
$64,147 USD
2365 hours / 2228 miles
$51,380 USD
3169 hours / 1746 miles
$43,345 USD
2285 hours / 3311 miles
$64,147 USD
3269 hours / 3540 miles
$55,666 USD
6905 hours / 4624 miles
$57,062 USD
5885 hours / 3807 miles
$59,196 USD
2497 hours / 2327 miles
$44,575 USD
View more
2351 hours / 3371 miles
$64,147 USD
2365 hours / 2228 miles
$51,380 USD
3169 hours / 1746 miles
$43,345 USD
2285 hours / 3311 miles
$64,147 USD
3269 hours / 3540 miles
$55,666 USD
6905 hours / 4624 miles
$57,062 USD
5885 hours / 3807 miles
$59,196 USD
2497 hours / 2327 miles
$44,575 USD
View more