IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2006 Cat D5N XL Crawler Dozer The last reported number of hours was 5768. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
120 in Wide PAT Blade
Carco 81971 Winch
Rear Auxiliary Hydraulics
Sweeps
22 in Single Grouser Track Shoes
Engine Power: 131 hp
Displacement: 317.4 cu in
Operating Weight: 20,741 lbs
Fuel Capacity: 65.5 gal
Blade Width: 10.5 ft
Blade Capacity: 2.86 yd³
Ground Pressure: 5.9 psi
Track Width: 20 in
Maximum Forward Speed: 5.6 mph
Maximum Reverse Speed: 6.2 mph
Dimensions (LxWxH): 13.5 ft x 7.9 ft x 9.1 ft
Serial Number / VIN: AGG02074
CE Mark: No CE mark found
Hour Meter / Odometer: 5768 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Inoperable
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Inoperable
Heater: Operational, The fan and temperature switches are inoperable.
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
A/C Compressor: Compressor will not engage
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: Radiator
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Auxiliary Hydraulic Plumbing: Capped off, Not operationally checked
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-turned
Winch: Operational
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 52 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 52 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
5868 hours
$200,000
1062 hours
$170,000
3773 hours
$30,000
$135,000
$150,000
992 hours
$215,000
View more
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
5868 hours
$200,000
1062 hours
$170,000
3773 hours
$30,000
$135,000
$150,000
992 hours
$215,000
View more