2014 Roadtec RP195e

9247 hours
Ships nationwide
#A2474504

Asking Price$16,000

Tax Benefits

$3,360

Price with tax savings$12,640

Est. Loan Payment

Price excludes taxes, fees, and shipping

Powerhouse Protection
Our buyer guarantee protects your purchase against anything missed during inspection.
IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.

About this equipment

2014 Roadtec RP195e Track Asphalt Paver The last reported number of hours was 9247. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.

Features

AI-Generated: Verify machine specs, features, and operability prior to purchasing.

Enclosed Cab with HVAC
Ergonomic Control Panel
High Visibility Operator Station
Wear-Resistant Conveyor Floor Plates
Adjustable Operator Seats
Advanced Material Flow Control
Electric Screed Heating
Paving Width Adjustment
Energy-Efficient LED Work Lights
Rearview Cameras for Increased Safety
Noise Reduction Insulation
Anti-Slip Operator Platform
Service Access Panels for Easy Maintenance

Specifications

AI-Generated: Verify machine specs, features, and operability prior to purchasing.

Hours: 9247
Year: 2014
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
Serial Number / VIN: 3025
CE Mark: No CE mark found
Hour Meter / Odometer: 9247 hrs
Exterior Lights: Some not operational, All front, side and four of the six rear work lights are not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Not equipped
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Right side conveyor only works when feed system is on
Oil Pressure: The gauge registers in the operating range. 54 PSI
Warning Lights: Operational
Screed Control Switches: Operational, Inoperable, Screed raise and lower functions but, the extensions and vibration are not operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2013 US EPA Label
Blow-by (subjective visual observation): Visible
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Pumps (Hydraulics): Hydraulic oil puddling and dripping from compartment under pumps. The source of the leak is unknown.
Hydraulic Motors: Oil accumulation
Hopper Wing Cylinders: Oil accumulation at both cylinders. Cylinders drift.
Screed Extension Cylinders: Could not test
Screed Vibrators: Inoperable
Limited Function Check: The hydraulic system was operational.
Screed Serial Number: Serial Number: 19930314
Metering Gates: Powered
Screed Heaters: Could not get heater to respond to the control
Screed Slope Adjustment: Powered adjustment, Not operational
Screed Crown Adjustment: Powered adjustment, Not operational
Screed Tow Point Adjustment: Powered adjustment
Mat Thickness Adjusters: Manual adjustment
Extension Tubes: Extensions are not operational
Spray Down System: Not operational
Wheel Studs: Left front wheel missing lugs
Limited Function Check: The main components were operational in a limited check., The right side screed control box has no power, the left side screed control box extensions, slope and vertical controls did not respond to the controls.
Left Track Belt Condition: Minor cuts
Left Rubber Belt Drive Lugs: Minor damage
Left Grouser Height: 18 mm
Right Track Belt Condition: Lug damge
Right Rubber Belt Drive Lugs: Damaged
Right Grouser Height: 19 mm
date of analysis: Sep 04, 2024
Silicon: 2.31 PPM
Tin: 1.72 PPM
Silver: 0 PPM
Aluminum: 9.2 PPM
Chromium: 4.32 PPM
Lead: 0 PPM
Copper: 1.53 PPM
Nickel: 3.34 PPM
Iron: 35.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%

Safety
- Travel Alarm
- Horn
- Safety Lock Out/Stop
Rubber Track Undercarriage
- Right Rubber Belt Drive Lugs
Oil Sample Analysis (engine)
General Appearance
- Exterior Lights
Control Station
- Warning Lights
- Screed Control Switches
- Gauges
- Limited Function Check
Engine
- Starter
- Oil Leaks
- Fuel Leaks
- Cooling System Leaks
Drivetrain
- Limited Function Check
Chassis
- Screed Slope Adjustment
- Screed Crown Adjustment
- Extension Tubes
- Spray Down System
- Limited Function Check
Hydraulics
- Pumps (Hydraulics)
- Screed Vibrators
- Limited Function Check

Digital Glovebox

For your convenience, we've included these documents free to download so you can make the best decision.

Close-up detailed photos

Inspection Report

VIEW

Listings may picture specialty attachments not included in the sale. If you have questions about machine configuration, contact our sales team.

Heavy Machinery, Happy Customers

Hear what customers are saying about Boom & Bucket.

Each and every one of y'all was professional.Dan W - Texas5/5I'm not your biggest client, but I was treated like I was.Ed K - Texas5/5Y'all got a good group of people that's keyAbe F - Texas5/5Everything went well.John L - New Mexico5/5I was really impressed with the pictures.Bobby P - Georgia5/5