No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2017 Hamm HD+90i Double Drum Roller The last reported number of hours was 1926. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Open Operator Station
Swivel Operator Controls
2017 US EPA Label
Deutz 114 hp 3.6 L Diesel Engine
Requires Diesel Exhaust Fluid
66 in Compaction Width
Water System
Engine Power: 131 hp
Displacement: 276 cu in
Operating Weight: 19,842 lbs
Drum Width: 66.2 in
Fuel Capacity: 79.3 gal
Max Travel Speed: 7.5 mph
Vibration Frequency 1: 30 Hz
Nominal Amplitude - High: 0.018 in
Nominal Amplitude - Low: 0.014 in
Centrifugal Force - High: 30,574 lbs
Centrifugal Force - Low: 24,465 lbs
Serial Number / VIN: H242-0092
Hour Meter / Odometer: 1926 hrs
Exterior Lights: Some not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Emissions Status: 2017 US EPA Label
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check - Compaction: The drivetrain was operational without a load.
Limited Function Check: The hydraulic system was operational.
Water System: Unable to test
Park Brake: Held against power, Stopped the machine while rolling
Limited Function Check (roller): The main chassis components were operational.
date of analysis: Apr 10, 2026
Silicon: 0.3 PPM
Tin: 0.74 PPM
Silver: 0 PPM
Aluminum: 0 PPM
Chromium: 0.62 PPM
Lead: 1.22 PPM
Copper: 0.24 PPM
Nickel: 0.14 PPM
Iron: 5.6 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597