IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2018 John Deere 3156G Processor The last reported number of hours was 11705. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Air Conditioner
Cab Riser
Forestry Package
Rear View Camera
2018 US EPA Label
Requires Diesel Exhaust Fluid
Waratah HTH624C Processor Head
Computerized Measuring
Steel Feed Rolls
Butt Saw
Top Saw
Right Front Corner Guard
Catwalks
28 in Double Grouser Track Shoes
High and Wide Undercarriage
Rock Guards
Serial Number / VIN: 1FF3156GJJF316071
Hour Meter / Odometer: 11705 hrs
Exterior Lights: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Auxiliary Hydraulic Control: Top saw was inoperable
Engine Oil Pressure: No oil pressure indicator
Gauges: Operational
Air Conditioner: Inoperable
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2018 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: Compressor will not engage
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Radiator: Oil sheen visible on top of coolant in reservoir
Oil Leaks: Hose on right side of engine block that leads to turbo
Limited Function Check: After jump starting, the engine ran.
Limited Function Check: The drivetrain was operational.
Hoses (Hydraulics): Dripping leak on or by hydraulic hose couplers at processor head rotator motor
Auxiliary Hydraulic Plumbing: Operational
Boom Lift Cylinder(s): Dripping leak on the right cylinder
Limited Function Check: The hydraulic system was operational.
Limited Function Check: The main components were operational in a limited check.
Limited Function Check: The main chassis components functioned during a limited check.
Left Grouser Height: 42 mm
Left Track Bushings: Bushings have not been turned
Left Track Rollers: Several leaking track rollers
Right Grouser Height: 42 mm
Right Track Bushings: Bushings have not been turned
Processor: All functions were operational except the top saw
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
3526 hours
$177,000
1 hours
$5,800
1 hours
$21,000
1 hours
$85,000
5055 hours
$700,000
12550 hours
$250,000
2383 hours
$750,000
7848 hours
$180,000
View more
3526 hours
$177,000
1 hours
$5,800
1 hours
$21,000
1 hours
$85,000
5055 hours
$700,000
12550 hours
$250,000
2383 hours
$750,000
7848 hours
$180,000
View more