No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
2018 John Deere 872GP AWD Motor Grader The last reported number of hours was 7632. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Ride Seat
Topcon Grade Control System
Requires Diesel Exhaust Fluid
16 ft / 4.88 m Moldboard
Push Block
Accumulators
Combination Ripper/Scarifier
Rear Auxiliary Hydraulics
17.5R25 Tires
Topcon PG-S3 Antennas (2)
Topcon GX-55 Monitor
Topcon MC-R3 receiver
Vib Pole
Engine Power: 287 hp
Displacement: 414.4 cu in
Top Speed - Forward: 24.5 mph
Top Speed - Reverse: 24.5 mph
Blade Width: 14 ft
Operating Weight: 42,060 lb
Fuel Capacity: 110 gal
Tire Size: 17.5R25
Length w/ Blade on Ground: 28.9 ft in
Width Over Tires: 8.5 ft in
Height to Top of Cab: 10.4 ft in
Wheelbase: 20.1 ft in
Blade Down Pressure: 24,251 lb
Blade Pull: 47,554 lb
Serial Number / VIN: 1DW872GPJJF686187
CE Mark: No CE mark found
Hour Meter / Odometer: 7632 hrs
Exterior Lights: Some not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present Requires Diesel Exhaust Fluid
Blow-by (subjective visual observation): Minor
Starter: Operational
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check: The drivetrain was operational.
Articulation Cylinders: Heavy pin and bushing movement
Blade Angle Cylinders: Heavy pin and bushing movement
Limited Function Check: The hydraulic system was operational.
Y-frame Pivot Trunnion: Shims remaining
Articulating Center Pins: Heavy movement
Limited Function Check (grader): The main chassis components were operational in a limited check.
Limited Function Check - Brakes: The brake system functioned, stopping and holding the machine.
Tire Brands: Doublecon
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
4474 hours
$195,000
6216 hours
$225,000
10169 hours
$145,000
3019 hours
$185,000
5181 hours
$220,000
8026 hours
$120,000
5135 hours
$220,000
13380 hours
$82,500
View more
4474 hours
$195,000
6216 hours
$225,000
10169 hours
$145,000
3019 hours
$185,000
5181 hours
$220,000
8026 hours
$120,000
5135 hours
$220,000
13380 hours
$82,500
View more