IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2020 Cat D9T Crawler Dozer The last reported number of hours was 7152. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Requires Diesel Exhaust Fluid
180 in Wide U-Blade w/ Dual Tilt
4 Cylinder Multi-Shank Ripper
Fast Fuel System
27 in Single Grouser Track Shoes
Engine Power: 436 hp
Operating Weight: 106,618 lbs
Fuel Capacity: 314 gal
Blade Capacity: 17.7 yd³
Blade Width: 13.5 ft
Ground Clearance: 22.4 in
Engine Model: Cat C18
Displacement: 1105 cu in
Track Width: 24 in
Length w/o Blade: 16.9 ft
Height to Top of Cab: 12.9 ft
Maximum Forward Speed: 7.3 mph
Maximum Reverse Speed: 9 mph
Emissions Rating: Tier 4 Final
Serial Number / VIN: CAT00D9TJREX00736
CE Mark: No CE mark found
Hour Meter / Odometer: 7152 hrs
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: Yes
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: After jump starting, the engine ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Push Arm Pivot/C-FrameTrunnions: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 71 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 72 mm
Right Track Bushings: Bushings have not been turned
date of analysis: May 08, 2026
Silicon: 0 PPM
Tin: 1.55 PPM
Silver: 0 PPM
Aluminum: 1.94 PPM
Chromium: 1.53 PPM
Lead: 1.57 PPM
Copper: 7.62 PPM
Nickel: 0.59 PPM
Iron: 25.71 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
371 hours
$150,000
2309 hours
$58,500
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
7425 hours
$52,000
10743 hours
$146,100
10294 hours
$73,125
2523 hours
$150,300
View more
371 hours
$150,000
2309 hours
$58,500
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
7425 hours
$52,000
10743 hours
$146,100
10294 hours
$73,125
2523 hours
$150,300
View more