No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Price excludes taxes, fees, and shipping
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
1978 Cat D8K Crawler Dozer The last reported number of hours was 7425. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
156 in Wide Semi-U Blade w/ Single Tilt
Drawbar
28 in Single Grouser Track Shoes
Engine Power: 300 hp
Net Power: 285 hp
Operating Weight: 70,503 lbs
Fuel Capacity: 170 gal
Blade Capacity: 9.7 yd³
Blade Width: 14 ft
Track Width: 22 in
Transmission Type: Powershift
Number of Forward Gears: 3
Number of Reverse Gears: 3
Max Speed - Forward: 6.8 mph
Max Speed - Reverse: 8.4 mph
Length w/o Blade: 16.1 ft
Width Over Tracks: 9.2 ft
Height to Top of Cab: 10.6 ft
Serial Number / VIN: 77V9646
Hour Meter / Odometer: 7425 hrs, Meter inoperable
Exterior Lights: Some not operational, Work lights are not operational
Travel Alarm: Inoperable
Horn: Inoperable
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: No US EPA Label Present
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: Front of engine, Oil Pan
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational, Dripping leak
Final Drives: Dripping Leak
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Blade Lift Cylinders: Dripping leak on the left cylinder, Dripping leak on the right cylinder
Limited Function Check: The hydraulic system was operational.
Blade Condition: Weld repair
Push Arm Pivot/C-FrameTrunnions: Heavy movement
Tilt Linkage Pins and Bushings: Heavy movement
Blade Trunnions/bushings: Heavy movement
Limited Function Check (dozer): The main components were operational in a limited check.
Belly Pans: Signs of oil leaks
Left Grouser Height: 90 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 90 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
Speak with an expert. 7 days a week.
Call: (888) 313-1597
5259 hours
$140,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
10232 hours
$260,000
8922 hours
$72,000
5868 hours
$200,000
1062 hours
$170,000
3358 hours
$86,554
View more
5259 hours
$140,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
10232 hours
$260,000
8922 hours
$72,000
5868 hours
$200,000
1062 hours
$170,000
3358 hours
$86,554
View more