IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2023 Cat 262D3 Skid Steer Loader Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Tier 4
2022 US EPA Label
Cat 4 Cylinder 3.3 L Diesel Engine
Engine Power: 74.3 hp
Displacement: 203.2 cu in
Net Power: 73 hp
Peak Torque at 1,500 rpm SAE J1995: 195 ft-lb
Operating Weight: 8,157 lb
Rated Operating Capacity: 2,700 lb
Tipping Load: 5,400 lb
Breakout Force: 5,886 lb
Hydraulic Flow - Standard: 23 gal/min
Hydraulic Pressure - Equipment: 3,335 psi
Hydraulic Pressure - High Flow: 3,000 psi
Maximum Overall Height: 157.4 in
Bucket Pin Height at Maximum Lift: 123 in
Reach at Maximum Lift and Dump: 31.5 in
Wheel Base: 43.5 in
Serial Number / VIN: CAT0262DPTP400664
Hour Meter / Odometer: 2345 hrs
Sheet Metal (fiberglass) Condition: Bent metal in areas. The cab/canopy has some damage
Exterior Lights: Operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted.
Engine: 2022 US EPA Label
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: After jump starting, the engine ran.
Limited Function Check: The drivetrain was operational.
Auxiliary Hydraulic Plumbing: Not operationally checked
Limited Function Check: The hydraulic system was operational.
Limited Function Check: The main chassis components were operational in a limited check.
Quick Coupler: Operational
Loader Bucket Cutting Edge/Shanks/Teeth: Reversible-not turned
For your convenience, we've included these documents free to download so you can make the best decision.