IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2023 John Deere 2654G Processor The last reported number of hours was 3501. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Air Conditioner
Forestry Package
2023 US EPA Label
Requires Diesel Exhaust Fluid
2023 Waratah HTH623C Steel Feed Rolls
Butt Saw
Top Saw
27.5 in Single Grouser Track Shoes
Rock Guards
Serial Number / VIN: 1FF2654GCPF260247
CE Mark: No CE mark found
Hour Meter / Odometer: 3501 hrs
Exterior Lights: Operational, 1 missing cab light lights are not operational
Travel Alarm: Missing
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Swing Brake: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Auxiliary Hydraulic Control: The auxiliary hydraulics could not be function checked.
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: The ambient temperature is too cold to check
Heater: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2023 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check: The drivetrain was operational.
Auxiliary Hydraulic Plumbing: Not operationally checked, End of stick
Limited Function Check: The hydraulic system was operational.
Limited Function Check: The main components were operational in a limited check.
Limited Function Check: The main chassis components functioned during a limited check.
Left Grouser Height: 63 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 64 mm
Right Track Bushings: Bushings have not been turned
Processor: The chain saw blade is missing and the bar is bent on top saw. The processor could not be function tested.
For your convenience, we've included these documents free to download so you can make the best decision.
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
10244 hours
$350,000
3526 hours
$177,000
16097 hours
$80,000
11705 hours
$249,000
31007 hours
$20,000
8511 hours
$25,000
5669 hours
$50,000
2159 hours
$90,000
View more
10244 hours
$350,000
3526 hours
$177,000
16097 hours
$80,000
11705 hours
$249,000
31007 hours
$20,000
8511 hours
$25,000
5669 hours
$50,000
2159 hours
$90,000
View more