Used Pavers for sale in California

-

1 results found

  • Price reduced

    2006 Ingersoll-Rand/Blaw-Knox PF4410 for sale2006 Ingersoll-Rand/Blaw-Knox PF4410 for sale2006 Ingersoll-Rand/Blaw-Knox PF4410 for sale2006 Ingersoll-Rand/Blaw-Knox PF4410 for sale2006 Ingersoll-Rand/Blaw-Knox PF4410 for sale2006 Ingersoll-Rand/Blaw-Knox PF4410 for sale2006 Ingersoll-Rand/Blaw-Knox PF4410 for sale2006 Ingersoll-Rand/Blaw-Knox PF4410 for sale

    2006 Ingersoll Rand/Blaw-Knox PF4410

    9,693 Hours

    $19,995

    $34,495

    Ships nationwide
    Quick View
    2006 Ingersoll-Rand/Blaw-Knox PF4410 for sale

    2006 Ingersoll Rand/Blaw-Knox PF4410

    Price reduced

    $34,495

    $19,995

    About this equipment

    This 2006 Blaw Knox PF4410 conveyor paver features a powerful 158 horsepower Cummins engine. Equipped with an 8 foot screed, it can pave widths up to 25 feet. This engine unit's engine and transmission appear to be functioning normally, but there are some active leaks in the hydraulic system and the left conveyor did not travel. This is a good opportunity to get an older paver for a great price!

    Specifications

    • Engine: Cummins QSB5.9-30TA - 158Hp - 5.9L - I6 - Turbo Diesel
    • Screed: 8'
    • Paver Width: 8' - 25' Max
    • Auger: 16" Diameter
    • Track Length: 102"
    • Track Width: 14"
    • Paving Depth: 1/4" - 8"
    • Hopper Capacity: 155 ft3/8.5 ton
    • Paving Speed: 242 ft/minute
    • Travel Speed: 8.5 mph
    • Track Gauge: 76.25"
    • Operational Weight: Tractor Only - 28,900 lbs / Tractor With Ultimate Screeds: 35,950 lbs

Get access to our latest deals

Overview

Pavers are self-propelled machines that lay down hot asphalt mix. The mix is usually loaded in the front, then carried by conveyers from the rear to augers that spread out the mixture, then leveled and compacted by a screed.

There are many different types of pavers that construction companies use to get the job done, including; rolled screen pavers, tracked pavers, wheeled pavers, hybrid offset pavers, side feeders, and inset pavers.

Frequently Asked Questions

  • Used pavers cost between $30,000 and $180,000.

  • Top manufacturers of pavers include Ingersoll-Rand, Carlson, and Caterpillar.

  • Common uses for pavers include paving roads, bridges, and parking lots.

  • Pavers on average weigh 18 tons (36,000 lbs)

  • The first step in operating a paver is adding asphalt or mix from a dump truck or material transfer unit into the paver’s hopper. The conveyor carries the asphalt to the auger, which places the mix in front of the screed for it to be spread over the width of the surface. Paver operators use screed controls to control the screed’s angle of attack. Additional controls allow the operator to correct the slope, speed, and flow.

  • When buying a used paver, it’s important to do a full inspection report to look at key components like the screed, track rollers, idlers, dual operator stations, and engine.

  • New machines will have the latest technology like sensors and material controls. Overall, the paver technology, which is just a conveyor and iron, hasn’t changed over the last 60 years.

  • The average hourly pay for an Asphalt Paver Operator is $19.50

  • You can learn to become a paver operator through trade school, finding an experienced operator, or an apprenticeship program.

Join our inventory mailing list to get early access to our best deals