IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Cat D8K Crawler Dozer The last reported number of hours was 5337. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Open Operator Station
155 in Wide Semi-U Blade w/ Single Tilt
2 Cylinder Multi-Shank Ripper
24 in Single Grouser Track Shoes
Engine Power: 300 hp
Net Power: 285 hp
Displacement: 1246 cu in
Number of Cylinders: 6
Operating Weight: 70,503 lb
Fuel Capacity: 115 gal
Blade Capacity: 5.9 cu yd
Blade Width: 13.4 ft
Blade Height: 5.3 ft
Max Speed Forward: 6.8 mph
Max Speed Reverse: 8.4 mph
Ground Pressure: 12.3 psi
Transmission Type: Powershift
Track Gauge: 6.5 ft
Hydraulic System Fluid Capacity: 14.5 gal
Serial Number / VIN: 77V14552
Hour Meter / Odometer: 5337 hrs
Indication of Additional Hours: There is an hour meter replacement/change label that has the following reading on it: 5127
Travel Alarm: Missing
Horn: Inoperable
Seat Belts: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The gauge registers in the operating range.
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Blow-by (subjective visual observation): Minor
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Ripper Cylinders: Dripping leak on the right cylinder
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-turned
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 2” mm
Left Track Bushings: Bushings have been turned
Right Grouser Height: 2” mm
Right Track Bushings: Bushings have been turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
7425 hours
$52,000
2843 hours
$65,000
4361 hours
$215,000
371 hours
$150,000
2309 hours
$58,500
$220,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
View more
7425 hours
$52,000
2843 hours
$65,000
4361 hours
$215,000
371 hours
$150,000
2309 hours
$58,500
$220,000
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
View more